When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Same issue with the connection. I actually just pulled everything apart, removed the board, reinstalled the board and FFC's etc...to solve a display issue. I set everything up again and it connects just fine. That was an hour ago so I'll go back to the garage in a bit to see if the phone connects or if I have to forget the device (iPhone) and pair it up again.
CX301: BSJ1211124-1124
Software: 2.2.21
Hardware: S7.8
Board (printed on circuit): Ver 2.0 211103
I didn't open the PCM again to check the board.. when I received it, I confirmed that it's the new board (as ordered) when I compare it with previous pictures posted here (new chip, etc.). The package also shows the new model number that ends in 8813WP3 vs 8013WP3.
Where can I find the latest firmware? The one in Isudar page seems to still link to 1124
I also installed the Isudar CarPlay mainboard (new version) and everything works great except wireless CarPlay.
I am able to connect my iPhone to the CarPlay module (just sometimes) but the connection sometimes gets lost and the music is stuttering or lagging. Sometimes wireless CarPlay is not lagging for some seconds and everything works great.
Sometimes I also get kicked out of wireless CarPlay and the music stops playing.
The antennas aren’t damaged, I already checked that.
For me it seems so be a software problem.
Does someone have an updated version for the CarPlay module or a bug fix?
I also installed the Isudar CarPlay mainboard (new version) and everything works great except wireless CarPlay.
I am able to connect my iPhone to the CarPlay module (just sometimes) but the connection sometimes gets lost and the music is stuttering or lagging. Sometimes wireless CarPlay is not lagging for some seconds and everything works great.
Sometimes I also get kicked out of wireless CarPlay and the music stops playing.
The antennas aren’t damaged, I already checked that.
For me it seems so be a software problem.
Does someone had the same issue or a software update which helped solving this issue?
This sounds very similar to the problem @Marcr92 was describing with his board. A new firmware was sent to him and he shared with me. PM your email and I can send you the update and see if that works for you.
This sounds very similar to the problem @Marcr92 was describing with his board. A new firmware was sent to him and he shared with me. PM your email and I can send you the update and see if that works for you.
I am not sure why, but I can not write you a private message, maybe my account is too new?
I am not sure why, but I can not write you a private message, maybe my account is too new?
Im going to open a general Dropbox or Google Drive account and drop all the FW updates I have there. I’ll post the link in this thread. Better than continue to send emails.
Im going to open a general Dropbox or Google Drive account and drop all the FW updates I have there. I’ll post the link in this thread. Better than continue to send emails.
perfect, thank you!
where did you get these firmwares? And did you had the same issue like I currently have?
See if this link works for Isudar Firmware updates (let me know if it doesn't). I'm sharing all I have. I can continue to post in this drive as I get them or if anyone else get them...
Downloaded the Firmware. Unzipped the folder. Copied the two file .BIN and the Other to the root.
Left my phone in the house, far away from the car
Went to the car, inserted the USB, went to Settings and started the update.
After 3 min everything appeared to be updated. The new firmware showed up on an ancient looking screen.
I turned the car off. Pulled Fuse 51.
Restart the car, when I press 'Info' I get a black/empty screen.
Did I brick it?
This showed up and I pressed ,"Updated SOC" . After pressing the button the screen goes black, assuming it's installing files and doing its thing. After 3min, this screen appeared. Is it done at this point? I shut the car down thinking it was done and removed the USB.
Downloaded the Firmware. Unzipped the folder. Copied the two file .BIN and the Other to the root.
Left my phone in the house, far away from the car
Went to the car, inserted the USB, went to Settings and started the update.
After 3 min everything appeared to be updated. The new firmware showed up on an ancient looking screen.
I turned the car off. Pulled Fuse 51.
Restart the car, when I press 'Info' I get a black/empty screen.
Did I brick it?
This showed up and I pressed ,"Updated SOC" . After pressing the button the screen goes black, assuming it's installing files and doing its thing. After 3min, this screen appeared. Is it done at this point? I shut the car down thinking it was done and removed the USB.
01-09-2022 | 12:38 AM
