What did you do to your 924/944 today
#4066
Three Wheelin'
#4068
Former Vendor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
[QUOTE=J1NX3D;9571000]beautiful car intrepidagent! do you have high res photos of your badge decal?[QUOTE]
The decal I was referring to is the one on the rear spoiler. The badge on the front is one of the Cerakote / paint combination pieces I've been making.
DSC_0102-1.jpg?t=1332852565
The decal I was referring to is the one on the rear spoiler. The badge on the front is one of the Cerakote / paint combination pieces I've been making.
DSC_0102-1.jpg?t=1332852565
#4069
Today I got
My Custom Title
Rennlist Member
My Custom Title
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yesterday- went to do my "bolt-on late cooling fan upgrade" and so much for bolt-on
![banghead](https://rennlist.com/forums/graemlins/banghead.gif)
Now to see if the late fans will fit in the early shroud... Or if I can use a late motor with an early fan blade...
![grr](https://rennlist.com/forums/graemlins/cussing.gif)
![banghead](https://rennlist.com/forums/graemlins/banghead.gif)
Now to see if the late fans will fit in the early shroud... Or if I can use a late motor with an early fan blade...
#4072
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Took the control arms off again - got it on the alignment rack and the clunk comes from the rear bushings; also noticed a crack in the header pipe and my new front monoballs are rotating in the a-arms (sigh) so I took off the monoballs and re-set them with Loctite 604, replaced the epoxy on the ball-joint repair which I guess I didn't mix enough (rats) and ordered new 968 bushings to replace my rotten ones. Good news/bad news is I can take the both control arms off the car in about 30 minutes (not including careful jacking) and I found out I'm not such a sh*t-hot mechanic despite all my groovy impact tools and torque-wrenches. Guess I need to be more patient and deliberate in my work. Now I'm looking for a new/old header pipe because I don't trust weld repairs on those cheesy pipes.
ps - the monoballs. They might work eventually but I doubt it. One side moves exactly like you would expect but the other is very stiff and requires a lot more pressure to move. Neither of them fit the a-arm as precisely as I was lead to believe (you're supposed to require heat/freezing to install them) so I think the build-quality is deficient. I have not tried to get a refund from the manufacturer (yet) as I am curious to see what they will do on the car, but I suggest that anyone following this thread use a large dollop of salt in their decision-process to use "weather-sealed" monoballs.
ps - the monoballs. They might work eventually but I doubt it. One side moves exactly like you would expect but the other is very stiff and requires a lot more pressure to move. Neither of them fit the a-arm as precisely as I was lead to believe (you're supposed to require heat/freezing to install them) so I think the build-quality is deficient. I have not tried to get a refund from the manufacturer (yet) as I am curious to see what they will do on the car, but I suggest that anyone following this thread use a large dollop of salt in their decision-process to use "weather-sealed" monoballs.
#4073
Advanced
Join Date: Sep 2006
Location: Oakville, Canada
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Dropped my car off at the bodyshop on Monday to fix the damage caused by a parking lot hit and run... so in the meantime I bought a copy of Original 924/944/968 and a 1987 Porsche Factory Salesman fact book off of internet to keep me happy. Should have the car back by Saturday, in time for our local Porsche Concours (my 951 isn't competing, but still needs to look her best).
#4074
Today I got
My Custom Title
Rennlist Member
My Custom Title
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Turns out I had 951 fans...
I took the fans out and they bolted right into the early shroud. Only problem is there's a slight bit of rubbing. I'm 90% sure it's the fan blade rubbing a tiny bit on the shroud, but I need to go check and make sure it's not rubbing on a radiator hose or anything.
I took the fans out and they bolted right into the early shroud. Only problem is there's a slight bit of rubbing. I'm 90% sure it's the fan blade rubbing a tiny bit on the shroud, but I need to go check and make sure it's not rubbing on a radiator hose or anything.
#4075
Today I got
My Custom Title
Rennlist Member
My Custom Title
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Also look in to getting "porsche 944, ultimate portfolio" by brooklands books. It's hundreds of pages of copies of period articles out of a plethora of magazines and sources on the 944, lots of interesting facts and pictures, and comparison road test figures with many cars from the era...
#4077
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Didn't do this today but over the past few months. I refinished a set of 16" 951 Fuchs during the winter and put them on early April.......was tired of sanding but more tired of seeing the car on jackstands...lol. Also finished and installed the 924CGT replica rear spoiler that Tony Garcia (TonyG) made from his mold for me. Finished it off with a decal from Van.
![rockon](https://rennlist.com/forums/graemlins/rockon.gif)
#4078
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm waiting for the imminent arrival of an M22 X 1.5 brass nut to replace the one that holds the thermo fan switch in place.
Last edited by curtisr; 07-31-2012 at 08:28 AM.