Garmin Automated Coaching
10-22-2020, 02:18 PM
#556
Even still... speed limit around here is 40 km/h... 
Guess a highway loop is the way to go.
Guess a highway loop is the way to go.
10-22-2020, 03:15 PM
#557
10-22-2020, 04:25 PM
#558
Track Day
In the FB thread, someone said that Garmin had told them to use this mount in their race car https://www.rammount.com/part/RAM-B-...yMR3PBb9au8WEo it looks like a good permanent solution.
https://www.rammount.com/part/RAM-HOL-GA75LU
https://www.rammount.com/part/RAM-B-238U
The Catalyst's magnetic mount does not fit in the cradle, so you would have to use Garmin's Fleet Suction Cup Mount with Magnetic Mount (part# 010-12543-00) which I have used with the Catalyst and confirmed that it works.
https://buy.garmin.com/en-US/US/p/569789
10-22-2020, 08:28 PM
#559
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,076
Received 3,224 Likes
on
1,854 Posts
The Catalyst's magnetic mount does not fit in the cradle, so you would have to use Garmin's Fleet Suction Cup Mount with Magnetic Mount (part# 010-12543-00) which I have used with the Catalyst and confirmed that it works.
https://buy.garmin.com/en-US/US/p/569789
https://buy.garmin.com/en-US/US/p/569789
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
10-22-2020, 10:17 PM
#560
Track Day
10-22-2020, 10:28 PM
#561
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,076
Received 3,224 Likes
on
1,854 Posts
If so, thank you. That will be my preferred solution for people needing the safety net of a rigid attachment as opposed to the 3D printed clip.
10-22-2020, 10:30 PM
#562
Track Day
10-22-2020, 10:33 PM
#563
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,076
Received 3,224 Likes
on
1,854 Posts
10-22-2020, 10:50 PM
#564
Rennlist Member
Originally Posted by claykos
Nice Lap! Man the new street cars have gotten good. What kind of tires is this? I might suggest playing with some different lines through 6 and 7, you are starting your entry middle of the track and holding it tight basically all the way around, not really using all the road available to you and I think you are giving up time here. It is a weird corner(s). Also, you are giving up time in the bowl by again pinching very tight and you have plenty of room on the exit which means you could have started unwinding and throttling up earlier. It is also a tricky corner. New pavement looks awesome! Can't wait to get out there again - it has been a long time.
Some food for thought on different lines to try. Might be interesting to experiment with different things and see what the Catalyst pushes you towards.
Some food for thought on different lines to try. Might be interesting to experiment with different things and see what the Catalyst pushes you towards.
The following users liked this post:
Martin S. (10-26-2020)
10-23-2020, 12:48 PM
#565
AutoX
Join Date: Jan 2012
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
10-23-2020, 01:14 PM
#566
Track Day
10-28-2020, 06:05 PM
#567
Rennlist Member
Slipping off the first page...
I liked it when this string was #1 for over a month...in a way, slipping off the 1st page may be good (For me). I don't want my competitors reading about Garmin Catalys. That will be my little secret.
The following 2 users liked this post by Erik Garci:
burnergt4 (10-28-2020),
Wild Weasel (10-28-2020)
Mount looks great...
10-28-2020, 06:43 PM
#570
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,076
Received 3,224 Likes
on
1,854 Posts
I now have that complete setup (RAM mount, Fleet mag base, RAM B-ball mount) in stock and ready for shipment to those that think they need it.
It is made specifically for this, and is the supported solution. $60 plus freight.
Of course, there are the carbon fiber and ABS “wings” that people have come out with for half to a little more than half of the RAM/Garmin solution above, and I have the ABS solution available, too.
Thank you, Eric Garci, for doing the work to figure this out.
It is made specifically for this, and is the supported solution. $60 plus freight.
Of course, there are the carbon fiber and ABS “wings” that people have come out with for half to a little more than half of the RAM/Garmin solution above, and I have the ABS solution available, too.
Thank you, Eric Garci, for doing the work to figure this out.
Last edited by ProCoach; 10-28-2020 at 07:21 PM.
The following users liked this post:
Erik Garci (10-28-2020)