What did you do to your 997 today?
The following 2 users liked this post by Uwon:
jayi836 (05-26-2020),
ru_stupid2 (05-25-2020)
Racer
Joined: Jun 2018
Posts: 438
Received 185 Likes
on
108 Posts
From: Cairns, North Queensland, Australia
Led Zep Kashmir, tunes right on point!
The following 2 users liked this post by BLU997:
ru_stupid2 (05-25-2020),
TopKatz (05-25-2020)
Three Wheelin'
Installed numeric cables, a new ebrake (mine was worn), shimmed all the play out of the shifter with 0.005” brass shim stock, GT3 bushings and hardwired in a lightning charger.
The following 3 users liked this post by rtl5009:
Racer
Joined: Jun 2018
Posts: 438
Received 185 Likes
on
108 Posts
From: Cairns, North Queensland, Australia
Detour
This is what winter looks like in Cairns Queensland Australia, today. Short drive to the hardware, mountain interlude, then to the grocery store
The following users liked this post:
PatrickBateman (11-26-2023)
Rennlist Member
Installation wasn’t difficult, but it was a first so took longer that in would for some with more experience. They provided clear installation instructions. Image quality is excellent and also has grid lines.
pics included.
They pre wired the Porsche specific harness which allows for using existing Bose components- AMP. They preloaded the Porsche splash as well.
Great image quality
pics included.
They pre wired the Porsche specific harness which allows for using existing Bose components- AMP. They preloaded the Porsche splash as well.
Great image quality
Racer
Joined: Jun 2018
Posts: 438
Received 185 Likes
on
108 Posts
From: Cairns, North Queensland, Australia
They sure are, they're generic auto store tips, sort of gives the rear of the car a pea shooter look.
I'm having trouble finding OEM or aftermarket tips to suit the PSE outlets.
I attempted to buy some knock off tips with carbon shield etc, with a view to adapt them to suit, but they sent 3 "correct" ones as per my order, and one that was completely different : (
3 out of 4 ain't bad, but useless for my application.
One of these is not like the others
I'm having trouble finding OEM or aftermarket tips to suit the PSE outlets.
I attempted to buy some knock off tips with carbon shield etc, with a view to adapt them to suit, but they sent 3 "correct" ones as per my order, and one that was completely different : (
3 out of 4 ain't bad, but useless for my application.
One of these is not like the others
Last edited by BLU997; 05-25-2020 at 09:16 PM. Reason: Add picture
Rennlist Member
Gave it a hand wash
..
Last edited by Medford997; 05-26-2020 at 02:13 AM. Reason: Posted by mistak
Installation wasn’t difficult, but it was a first so took longer that in would for some with more experience. They provided clear installation instructions. Image quality is excellent and also has grid lines.
pics included.
They pre wired the Porsche specific harness which allows for using existing Bose components- AMP. They preloaded the Porsche splash as well.
Great image quality
pics included.
They pre wired the Porsche specific harness which allows for using existing Bose components- AMP. They preloaded the Porsche splash as well.
Great image quality
TIA
Rennlist Member
Installed numeric cables, a new ebrake (mine was worn), shimmed all the play out of the shifter with 0.005” brass shim stock, GT3 bushings and hardwired in a lightning charger.
https://youtu.be/0PUQtNNpr1g
https://youtu.be/0PUQtNNpr1g
Would love to know more about how/where you hard-wired the lightening charger.
Thx!
Bob
Burning Brakes
Installed numeric cables, a new ebrake (mine was worn), shimmed all the play out of the shifter with 0.005” brass shim stock, GT3 bushings and hardwired in a lightning charger.
https://youtu.be/0PUQtNNpr1g
https://youtu.be/0PUQtNNpr1g
Rennlist Member
Installed numeric cables, a new ebrake (mine was worn), shimmed all the play out of the shifter with 0.005” brass shim stock, GT3 bushings and hardwired in a lightning charger.
https://youtu.be/0PUQtNNpr1g
https://youtu.be/0PUQtNNpr1g
Is this basically what Function First offers?
Same install?
Where did you get the shim stock and GT3 bushings?
Thanks!
Nordschleife Master