When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thinkware Dashcam set up. Had same one installed in my daily driver (Audi) and so far pretty good. Great picture and HD is good...didn't need 4k version. Thinkware Q800Pro 2 channel Dashcam and iVolt Accessory Battery
This forum is costing me a small fortune... Thanks GJS NYC 😂
I’ve just ordered a set of HRE FF11 in tarmac for my Carmine red C4S. These will be my summer wheels, so I’ll eventually get them on the car around May next year 😅 Until then, I’ll keep the OEM alloys with the Alpin 5 on - they are a tremendous tyre.
So's when I'm spinning wildly out of control I can center my steering wheel for a rapid recovery when the scenery stops moving.
.
What kind of tape is that? I did that on my F80 M3 with white a few years back and forgot what tape I used. It looks just as good as yours and held up great. Whatever it was, looks like yours and was not electrical tape.
Also installed clear corner lights, painted Porsche center caps. New Carbonio spring-loaded front plate bracket mount and new Michelin Alpin 5s on the way tomorrow.
[QUOTE=peterdouglas;17112178 What tape did you use?[/QUOTE]
3M 2080 G13 GLOSS HOT ROD RED 3in x 5in (SAMPLE SIZE) Car Wrap Vinyl Film
$1.99 on Amazon
I cut a strip along the 5" edge 5/16" wide.
The color side of the film comes with a very thin clear coating that you need to remove before installation. The adhesive on the backside of the tape will not adhere to the clear film when you wrap the tape over itself.
Lastly I used a very thin plastic trim tool to tuck the edges in around and into the circular grooves on the steering wheel that you are covering with this tape.
.
Last edited by Bluehighways; 12-22-2020 at 06:31 PM.
3M 2080 G13 GLOSS HOT ROD RED 3in x 5in (SAMPLE SIZE) Car Wrap Vinyl Film
$1.99 on Amazon
I cut a strip along the 5" edge 5/16" wide.
The color side of the film comes with a very thin clear coating that you need to remove before installation. The adhesive on the backside of the tape will not adhere to the clear film when you wrap the tape over itself.
Lastly I used a very thin plastic trim tool to tuck the edges in around and into the circular grooves on the steering wheel that you are covering with this tape.
What kind of tape is that? I did that on my F80 M3 with white a few years back and forgot what tape I used. It looks just as good as yours and held up great. Whatever it was, looks like yours and was not electrical tape.
See my adjacent write-up to peterdouglas.
I believe we're practically neighbors. If you want; shoot me a PM and I'd be happy to meet for a quick socially distanced hand off.
The single 3" X 5" piece that I have is enough to probably do at least a dozen cars. I'd be happy to share a few 5/16" strips with you. No charge even . . . I'm just that kind of a generous person. LOL
This forum is costing me a small fortune... Thanks GJS NYC 😂
I’ve just ordered a set of HRE FF11 in tarmac for my Carmine red C4S. These will be my summer wheels, so I’ll eventually get them on the car around May next year 😅 Until then, I’ll keep the OEM alloys with the Alpin 5 on - they are a tremendous tyre.
Yes there is always something else to add or do if you stay on here long enough..both pre car delivery and most definitely after it arrives! LOL
BTW did any of you guys get a gift from Porsche? Mine arrived today. Nice pen!
Package from Porsche Nice welcome to your 992 setup
Last edited by mdrobc1213; 12-23-2020 at 01:54 AM.
12-22-2020, 04:52 AM
