When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3M 2080 G13 GLOSS HOT ROD RED 3in x 5in (SAMPLE SIZE) Car Wrap Vinyl Film
$1.99 on Amazon
I cut a strip along the 5" edge 5/16" wide.
The color side of the film comes with a very thin clear coating that you need to remove before installation. The adhesive on the backside of the tape will not adhere to the clear film when you wrap the tape over itself.
Lastly I used a very thin plastic trim tool to tuck the edges in around and into the circular grooves on the steering wheel that you are covering with this tape.
.
Any idea on how easy it will be to get off with regards to leaving residue?
Yes there is always something else to add or do if you stay on here long enough..both pre car delivery and most definitely after it arrives! LOL
BTW did any of you guys get a gift from Porsche? Mine arrived today. Nice pen!
Package from Porsche Nice welcome to your 992 setup
it is very nice but it is the same that one gets for a base macan CPO - would have been nice to have moved up to say Montblanc territory for a coar 3-4X the value
Also installed clear corner lights, painted Porsche center caps. New Carbonio spring-loaded front plate bracket mount and new Michelin Alpin 5s on the way tomorrow.
Looks great!
@ryandarr1979 any pics of the front plate mount? Did you self-install?
Also added Michelin PA5s today, so with my luck, probably won’t get any more snow this season. You’re welcome everyone.
Ryan I dont know how else to say this, other than just saying it... But that plate placement looks awful. What's the story behind why you have that there?
Ryan I dont know how else to say this, other than just saying it... But that plate placement looks awful. What's the story behind why you have that there?
No worries Perm, I get it. Carbonio makes a spring loaded bracket that mounts under the bumper in seconds with no drilled holes, using existing holes in the bottom of the bumper. Massachusetts requires a front plate. I just put this on to get an inspection sticker. I’m planning on having it spend most of its time in the frunk. I’m going to make some tweaks to get it a little higher but not too much so that it doesn’t impede the front camera. This is a horrible angle shot but the plate actually sits higher than the front splitter by quite a bit. I would have taken the picture lower and kneeling but didn’t want to get my slacks wet and dirty from the snow.
No worries Perm, I get it. Carbonio makes a spring loaded bracket that mounts under the bumper in seconds with no drilled holes, using existing holes in the bottom of the bumper. Massachusetts requires a front plate. I just put this on to get an inspection sticker. I’m planning on having it spend most of its time in the frunk. I’m going to make some tweaks to get it a little higher but not too much so that it doesn’t impede the front camera. This is a horrible angle shot but the plate actually sits higher than the front splitter by quite a bit. I would have taken the picture lower and kneeling but didn’t want to get my slacks wet and dirty from the snow.
Oh I see. I was going to say, that doesn’t seem like your style.
I have a 15 dollar Amazon plate mount that I double stick taped to the bumper for fix it tickets. Otherwise I rock no front plate. I got caught once and simply taped it one, got it sighed off, payed the fine and off it went until next time.
ICBEAMER Black Universal Front Aluminum Bumper License Plate Mount Relocator Frame Bracket Holder Bar [Drilling Require] https://www.amazon.com/dp/B07HCWQ319/ref=cm_sw_r_cp_api_glc_fabc_ZT.4FbEMVYVFR
And ... however popular (or not) comes close to matching the (deviated) speed blue seat centers in my 992TTS.
in for a dime ... in for a dollar!
I like, I especially like that you did not use the plastic middle piece that it comes with which I think is not as nice as keeping the original chrome.
LOL I love the tile - I have two lined up waiting and waiting. Unfortunately having two brightly covered keys is still not going to be good enough to stop me from losing the keys.
Welp, bought a set of these for my new 992 and then got a second set thrown in by my dealer. By far the easiest aesthetic mod you can do. Huge visual impact.
I guess I’ll sell the second set, send a PM if you want to save a few bucks off Suncoast.
Welp, bought a set of these for my new 992 and then got a second set thrown in by my dealer. By far the easiest aesthetic mod you can do. Huge visual impact.
I guess I’ll sell the second set, send a PM if you want to save a few bucks off Suncoast.
Just installed mine—took < 5 minutes and oh what a difference!
Nice video. A few questions:
How big is this unit - it looks relatively small. Could you post a pic of it installed to see the scale? Also, what was the main reason you installed the camera? Insurance?