What did you buy your 992 today thread
#751
Rennlist Member
Thinkware Dashcam set up. Had same one installed in my daily driver (Audi) and so far pretty good. Great picture and HD is good...didn't need 4k version.
Thinkware Q800Pro 2 channel Dashcam and iVolt Accessory Battery
Thinkware Q800Pro 2 channel Dashcam and iVolt Accessory Battery
#752
This forum is costing me a small fortune... Thanks GJS NYC 😂
I’ve just ordered a set of HRE FF11 in tarmac for my Carmine red C4S. These will be my summer wheels, so I’ll eventually get them on the car around May next year 😅 Until then, I’ll keep the OEM alloys with the Alpin 5 on - they are a tremendous tyre.
I’ve just ordered a set of HRE FF11 in tarmac for my Carmine red C4S. These will be my summer wheels, so I’ll eventually get them on the car around May next year 😅 Until then, I’ll keep the OEM alloys with the Alpin 5 on - they are a tremendous tyre.
#753
Three Wheelin'
#754
Instructor
Waiting for the car to put them on!
#756
Instructor
#757
Three Wheelin'
My C2S all wrapped and tinted.
Also installed clear corner lights, painted Porsche center caps. New Carbonio spring-loaded front plate bracket mount and new Michelin Alpin 5s on the way tomorrow.
Also installed clear corner lights, painted Porsche center caps. New Carbonio spring-loaded front plate bracket mount and new Michelin Alpin 5s on the way tomorrow.
The following 5 users liked this post by ryandarr1979:
356to992 (12-22-2020),
drgav2005 (12-22-2020),
mdrobc1213 (12-23-2020),
mrcarlo (12-22-2020),
Piacenza (12-28-2020)
#758
#760
Burning Brakes
#761
Rennlist Member
Join Date: Aug 2020
Location: Orange County California
Posts: 2,789
Received 2,632 Likes
on
1,239 Posts
[QUOTE=peterdouglas;17112178 What tape did you use?[/QUOTE]
3M 2080 G13 GLOSS HOT ROD RED 3in x 5in (SAMPLE SIZE) Car Wrap Vinyl Film
$1.99 on Amazon
I cut a strip along the 5" edge 5/16" wide.
The color side of the film comes with a very thin clear coating that you need to remove before installation. The adhesive on the backside of the tape will not adhere to the clear film when you wrap the tape over itself.
Lastly I used a very thin plastic trim tool to tuck the edges in around and into the circular grooves on the steering wheel that you are covering with this tape.
.
3M 2080 G13 GLOSS HOT ROD RED 3in x 5in (SAMPLE SIZE) Car Wrap Vinyl Film
$1.99 on Amazon
I cut a strip along the 5" edge 5/16" wide.
The color side of the film comes with a very thin clear coating that you need to remove before installation. The adhesive on the backside of the tape will not adhere to the clear film when you wrap the tape over itself.
Lastly I used a very thin plastic trim tool to tuck the edges in around and into the circular grooves on the steering wheel that you are covering with this tape.
.
Last edited by Bluehighways; 12-22-2020 at 06:31 PM.
#762
Rennlist Member
Join Date: Aug 2020
Location: Orange County California
Posts: 2,789
Received 2,632 Likes
on
1,239 Posts
Today's projects: I installed a set of the Clear Front Turn Signals and put the PCA Roundel on the Engine Lid.
.
.
The following users liked this post:
Schwarz992C4S (01-06-2021)
#763
Burning Brakes
3M 2080 G13 GLOSS HOT ROD RED 3in x 5in (SAMPLE SIZE) Car Wrap Vinyl Film
$1.99 on Amazon
I cut a strip along the 5" edge 5/16" wide.
The color side of the film comes with a very thin clear coating that you need to remove before installation. The adhesive on the backside of the tape will not adhere to the clear film when you wrap the tape over itself.
Lastly I used a very thin plastic trim tool to tuck the edges in around and into the circular grooves on the steering wheel that you are covering with this tape.
$1.99 on Amazon
I cut a strip along the 5" edge 5/16" wide.
The color side of the film comes with a very thin clear coating that you need to remove before installation. The adhesive on the backside of the tape will not adhere to the clear film when you wrap the tape over itself.
Lastly I used a very thin plastic trim tool to tuck the edges in around and into the circular grooves on the steering wheel that you are covering with this tape.
#764
Rennlist Member
Join Date: Aug 2020
Location: Orange County California
Posts: 2,789
Received 2,632 Likes
on
1,239 Posts
I believe we're practically neighbors. If you want; shoot me a PM and I'd be happy to meet for a quick socially distanced hand off.
The single 3" X 5" piece that I have is enough to probably do at least a dozen cars. I'd be happy to share a few 5/16" strips with you. No charge even . . . I'm just that kind of a generous person. LOL
#765
Rennlist Member
This forum is costing me a small fortune... Thanks GJS NYC 😂
I’ve just ordered a set of HRE FF11 in tarmac for my Carmine red C4S. These will be my summer wheels, so I’ll eventually get them on the car around May next year 😅 Until then, I’ll keep the OEM alloys with the Alpin 5 on - they are a tremendous tyre.
I’ve just ordered a set of HRE FF11 in tarmac for my Carmine red C4S. These will be my summer wheels, so I’ll eventually get them on the car around May next year 😅 Until then, I’ll keep the OEM alloys with the Alpin 5 on - they are a tremendous tyre.
BTW did any of you guys get a gift from Porsche? Mine arrived today. Nice pen!
Package from Porsche
Nice welcome to your 992 setup
Last edited by mdrobc1213; 12-23-2020 at 01:54 AM.
The following 5 users liked this post by mdrobc1213:
510michael (12-23-2020),
drgav2005 (12-23-2020),
Kcposche25 (12-23-2020),
RolandT (12-23-2020),
Wilsontour (12-23-2020)