What did you do to your 924/944 today
04-14-2011, 03:22 AM
#2614
Pro
Got my Ecode headlight kit from rennbay the other day installed it, had problems with the connector hooking up to the original headlight connector so i had to zip some of the plastic off so it would get a good connection, then i discovered my high beams would not work went through 2 relays and discovered the wires were hooked up wrong to the high beam relay, bought a new relay then fixed the wiring problem and now they work great, I like the yellowstar bulbs so far very bright, I had to adjust my driver side headlight height though haha
04-14-2011, 08:38 AM
#2616
Rennlist Member
got my 951 a k27 cold side housing, turbine and backing plate in excellent condition. Planning to rebuild a k26/6 hot side and turn it into a k27/6 
04-14-2011, 01:31 PM
#2617
Today I fixed my wobbly drivers side mirror. I had to replace the spring that holds the two pieces together. It took about an hour, and I had to cut and splice the wires in the mirror. It was totally worth the work.
I also put a new bushing in my shifter to eliminate a rattle while I was out in the garage.
A good day.
I also put a new bushing in my shifter to eliminate a rattle while I was out in the garage.
A good day.
04-15-2011, 01:29 AM
#2618
Advanced
Join Date: Mar 2011
Location: Urbana Illinois
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
I have been working on these!
https://rennlist.com/forums/924-931-...one-dials.html
Turning out to be a real pain in the @#$ but I'm getting there, slowly but surely....
https://rennlist.com/forums/924-931-...one-dials.html
Turning out to be a real pain in the @#$ but I'm getting there, slowly but surely....
04-15-2011, 01:54 AM
#2619
Intermediate
Join Date: Feb 2011
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Just waiting on my ball joint rebuild kit, fuel pressure regulator, damper, distributor cap .... and then the fun will begin...
Mostly concerned about the ball joint, hoping my A-arm is still in good shape.
Mostly concerned about the ball joint, hoping my A-arm is still in good shape.
04-15-2011, 02:02 AM
#2620
Track Day
Join Date: Feb 2011
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Got my repaired dme back from systems consulting. Idle problem fixed! Took my wife on a quick test cruise to the grocery store. No problems!
Dyed my console using the sem vinyl dye in sandstone color. Looks really good. Lower dash is next.
Dyed my console using the sem vinyl dye in sandstone color. Looks really good. Lower dash is next.
04-15-2011, 08:13 PM
#2622
Three Wheelin'
Drove it interstate about 800 kms and only used a bit over a tank. Much better economy on open road. Guess that will help as I also got a *speeding* ticket for doing 5 kmh over limit 
peace
peace
04-15-2011, 10:13 PM
#2624
Rennlist Member
Drove my '85 NA Auto for the 33rd day in a row. Ha cha cha!!!! Nothing but good here!!!! As I am driving home it turns 100,000 (or maybe a bit more if you believe the guy I bought it from). Thanks for all the help and advice everyone.
04-15-2011, 10:15 PM
#2625
Rennlist Member
OK fat finger disease - should read "my '86 NA Auto"