What did you do to your 997TT today?
The following 3 users liked this post by TV997S2:
#663
Rennlist Member
nice, euro-approved hrsprs. Congrats on the new ride, beautiful color
I'll send some over later, we got unexpected snow yesterday in Denver and its on summers
#664
Rennlist Member
The following 2 users liked this post by kasperberry:
NSXavier (11-18-2022),
Rig.Stunts (11-18-2022)
#665
Rennlist Member
deleted duplicate post
Last edited by kasperberry; 11-17-2022 at 06:32 PM.
#666
Rennline grill guard
Here ya go. black RL Grills are subtle and functional, the zunsports are nice bc you can pop them on/off but more of an aftermarket look with the frame/surround. DRLs add a nice modern touch, look oe when off. I only did it bc my signal/city light housings were trashed (tried to restore but wasn't satisfied) and the oem replacements are pricey. we went extra mile wrapping wires and hiding everything well, the control box is a tight squeeze behind bumper. not sure if I'd do DRLs again but do like end result
#667
Rennlist Member
Yep, lowered on bilstein b16 damptronic. running 15mm spacer R, no F spacer, wheels came with car and I don't have exact offset on hand. Not sure if they are WB or NB spec, the last owner bought them on RL. my gut tells me NB hence why the 15mm spacer out back. Think I could do 20mm R / 5mm F with these wheels. Still tucked a little bit since its pretty low, new set should be flushed.
#668
Yep, lowered on bilstein b16 damptronic. running 15mm spacer R, no F spacer, wheels came with car and I don't have exact offset on hand. Not sure if they are WB or NB spec, the last owner bought them on RL. my gut tells me NB hence why the 15mm spacer out back. Think I could do 20mm R / 5mm F with these wheels. Still tucked a little bit since its pretty low, new set should be flushed.
#669
Yep, lowered on bilstein b16 damptronic. running 15mm spacer R, no F spacer, wheels came with car and I don't have exact offset on hand. Not sure if they are WB or NB spec, the last owner bought them on RL. my gut tells me NB hence why the 15mm spacer out back. Think I could do 20mm R / 5mm F with these wheels. Still tucked a little bit since its pretty low, new set should be flushed.
#672
Rennlist Member
replaced these:
and this arrived:
and this arrived:
The following users liked this post:
snolvr (12-28-2022)
#673
#674
Rennlist Member
Jchutch (instagram).
I had a 3" speedtech before this without 1/4 wave resonators and the drone was terrible.
I did the calcs for the lengths of the resonators and had Jchutch make them to size. Basically zero drone with this setup (full 3" catless)
I had a 3" speedtech before this without 1/4 wave resonators and the drone was terrible.
I did the calcs for the lengths of the resonators and had Jchutch make them to size. Basically zero drone with this setup (full 3" catless)
#675
Advanced