What did you do to your 997TT today?
The following 2 users liked this post by 9971tt:
jayi836 (04-25-2023),
TheDeckMan (07-04-2023)
#724
Rennlist Member
got one exciting shipment from Belgium, been dreaming about getting my hands on a set of these since I got the car. cleaned, Colorlouck leather protector & leather shield, and installed. Got a quick drive in before a storm rolled in last night, so snug. Interior is really coming together. couple things to do to the door cards and i'll get it out for some proper photos
#726
Basically just like a 996 delete but we tore apart the clutch pack in the diff and hooked it back up. There are 2 different 2 wire plugs to the front diff, we mounted the temp sensor and the ring that goes around the clutch pack back into the car with both plugged in to keep electronics happy. I used the spindle ends from the disassembled cv axles and removed the rest of the axles, drive shaft, clutch and front diff. Just waiting on a part to fix one of the coolant leaks coming from rt side front cooler.
The following 2 users liked this post by 9971tt:
rosemont83 (04-20-2023),
V-TT (04-20-2023)
#727
My kid is editing the videos and time lapse footage now. We should have a full youtube walkthrough soon.
Basically just like a 996 delete but we tore apart the clutch pack in the diff and hooked it back up. There are 2 different 2 wire plugs to the front diff, we mounted the temp sensor and the ring that goes around the clutch pack back into the car with both plugged in to keep electronics happy. I used the spindle ends from the disassembled cv axles and removed the rest of the axles, drive shaft, clutch and front diff. Just waiting on a part to fix one of the coolant leaks coming from rt side front cooler.
Basically just like a 996 delete but we tore apart the clutch pack in the diff and hooked it back up. There are 2 different 2 wire plugs to the front diff, we mounted the temp sensor and the ring that goes around the clutch pack back into the car with both plugged in to keep electronics happy. I used the spindle ends from the disassembled cv axles and removed the rest of the axles, drive shaft, clutch and front diff. Just waiting on a part to fix one of the coolant leaks coming from rt side front cooler.
The following users liked this post:
Rasta997 Turbo (04-21-2023)
The following users liked this post:
Rasta997 Turbo (04-25-2023)
The following 3 users liked this post by RLR997:
#731
Burning Brakes
Where are you located any interest in selling the front axle?
#732
Rennlist Member
had a buddy code out the passenger AWS out and no dash codes are showing. There is one DTC for a short circuit to the passenger belt buckle bc the euro belt buckle that comes fixed to the seat doesn't have a sensor wire that runs to the wiring harness. I'm not concerned as it does not show a dash light. I may retro fit my OE passenger belt buckle and mount it under the seat and into the wiring harness with a male insert to get rid of that DTC. There are a few threads on how folks actually retrofit everything including a passenger weight sensor/belt buckle. Most seem to just code out like I did