When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Installed an OEM Aero spoiler today. Traded my original spoiler plus cash from a local guy selling his Turbo with the Aero spoiler installed on it. Had to get the top deck resprayed but im ecstatic as i love the aero spoiler but could never find myself getting a replica.
Nice! Did you get a new cable for the fan/brake light or did you get into the ECU and disable the wing deployment function to avoid the CEL?
I ordered a new cable. Still hasnt shown up yet, should be here any day now.
Any idea on how to get the Third breaklight out? Theres no way to get to it from the back and looking at the replacement third breaklights its held on by a spring mechanism.
Nice! How difficult is it to pry off the original sills...any tips?
Not terribly hard, i heated every section i was lifting with heat gun. I started first with a plastic trim tool until i can get my hands under it. Takes alot of force to lift it up.
Got bored and decided to install carbon fiber doors sills and the plastic trim. Completes my carbon fiber interior.
Those look good! Swapped mine out to the aluminum version earlier this year. Now that it looks so pretty, you have to do the leg sweeps as you get in and out to avoid new scratches and scuffs!
Those look good! Swapped mine out to the aluminum version earlier this year. Now that it looks so pretty, you have to do the leg sweeps as you get in and out to avoid new scratches and scuffs!
Alternatively, put a PPF on it. That should help with the scuffing.
I completed a very long journey to get the clear 997.2 tail lights. They're not available anywhere despite what any websites say. I finally sourced a set from overseas and they cleared customs. I got them today and threw them on and they look pretty good I must say!
I like your wing; my factory 997.1 wing finally has the hydraulic issue on the passenger side. This week going to rebuild the wing motor and hydraulic system. I would like to replace the stock wing with an aftermarket/carbon fiber wing. I don't want to replace the whole deck lid; want to stay with the factory system. I found a wing from Vividracing, the VR Aero GT2. Looks very similar to yours. Where did you purchase the wing? I was also thinking about adding the 2" spacers for the rams from Renntech.
I like your wing; my factory 997.1 wing finally has the hydraulic issue on the passenger side. This week going to rebuild the wing motor and hydraulic system. I would like to replace the stock wing with an aftermarket/carbon fiber wing. I don't want to replace the whole deck lid; want to stay with the factory system. I found a wing from Vividracing, the VR Aero GT2. Looks very similar to yours. Where did you purchase the wing? I was also thinking about adding the 2" spacers for the rams from Renntech.
Jeff
You nailed it- the VR GT2 CF wing. I had it painted to match. Funny enough, my next project is installing the Rennkit 3inch eRam kit and Magnus Motorsports slim fan kit.