The 997 GT3/RS Cars For Sale Thread...
I have configured the .2 RS I would do if I had the chance to do so. Unfortunately this configuration doesn’t exist.
2011 911 GT3 RS Base Price: $135,500
78 Black Full Leather
191 Lightweight Lithium-Ion Battery
450 Ceramic Composite Brakes-PCCB
490 Sound Package Plus
511 Contrast - White Gold Metallic
585 Cupholders
603 Dynamic Cornering Lights
619 Bluetooth Phone Interface
810 Floor Mats in Interior Color
870 Universal Audio Interface
B4 Carrara White
CYW Sun Visors Alcantara
XSC Porsche Crest on Headrests
XUB Headlight Cleaner Cover in Exterior Color
XXZ Foot Rest Aluminum
Original MSRP (after gas guzzler tax and destination charge): $154,355
2011 911 GT3 RS Base Price: $135,500
78 Black Full Leather
191 Lightweight Lithium-Ion Battery
450 Ceramic Composite Brakes-PCCB
490 Sound Package Plus
511 Contrast - White Gold Metallic
585 Cupholders
603 Dynamic Cornering Lights
619 Bluetooth Phone Interface
810 Floor Mats in Interior Color
870 Universal Audio Interface
B4 Carrara White
CYW Sun Visors Alcantara
XSC Porsche Crest on Headrests
XUB Headlight Cleaner Cover in Exterior Color
XXZ Foot Rest Aluminum
Original MSRP (after gas guzzler tax and destination charge): $154,355
Last edited by RapidGT; 11-28-2023 at 09:34 AM.
The following 2 users liked this post by RapidGT:
mikes70 (11-28-2023),
SupraSaiyan (11-28-2023)
I have configured the .2 RS I would do if I had the chance to do so. Unfortunately this configuration doesn’t exist.
2011 911 GT3 RS Base Price: $135,500
78 Black Full Leather
191 Lightweight Lithium-Ion Battery
450 Ceramic Composite Brakes-PCCB
490 Sound Package Plus
511 Contrast - White Gold Metallic
585 Cupholders
603 Dynamic Cornering Lights
619 Bluetooth Phone Interface
810 Floor Mats in Interior Color
870 Universal Audio Interface
B4 Carrara White
CYW Sun Visors Alcantara
XSC Porsche Crest on Headrests
XUB Headlight Cleaner Cover in Exterior Color
XXZ Foot Rest Aluminum
Original MSRP (after gas guzzler tax and destination charge): $154,355
2011 911 GT3 RS Base Price: $135,500
78 Black Full Leather
191 Lightweight Lithium-Ion Battery
450 Ceramic Composite Brakes-PCCB
490 Sound Package Plus
511 Contrast - White Gold Metallic
585 Cupholders
603 Dynamic Cornering Lights
619 Bluetooth Phone Interface
810 Floor Mats in Interior Color
870 Universal Audio Interface
B4 Carrara White
CYW Sun Visors Alcantara
XSC Porsche Crest on Headrests
XUB Headlight Cleaner Cover in Exterior Color
XXZ Foot Rest Aluminum
Original MSRP (after gas guzzler tax and destination charge): $154,355
I have configured the .2 RS I would do if I had the chance to do so. Unfortunately this configuration doesn’t exist.
2011 911 GT3 RS Base Price: $135,500
78 Black Full Leather
191 Lightweight Lithium-Ion Battery
450 Ceramic Composite Brakes-PCCB
490 Sound Package Plus
511 Contrast - White Gold Metallic
585 Cupholders
603 Dynamic Cornering Lights
619 Bluetooth Phone Interface
810 Floor Mats in Interior Color
870 Universal Audio Interface
B4 Carrara White
CYW Sun Visors Alcantara
XSC Porsche Crest on Headrests
XUB Headlight Cleaner Cover in Exterior Color
XXZ Foot Rest Aluminum
Original MSRP (after gas guzzler tax and destination charge): $154,355
2011 911 GT3 RS Base Price: $135,500
78 Black Full Leather
191 Lightweight Lithium-Ion Battery
450 Ceramic Composite Brakes-PCCB
490 Sound Package Plus
511 Contrast - White Gold Metallic
585 Cupholders
603 Dynamic Cornering Lights
619 Bluetooth Phone Interface
810 Floor Mats in Interior Color
870 Universal Audio Interface
B4 Carrara White
CYW Sun Visors Alcantara
XSC Porsche Crest on Headrests
XUB Headlight Cleaner Cover in Exterior Color
XXZ Foot Rest Aluminum
Original MSRP (after gas guzzler tax and destination charge): $154,355
The following users liked this post:
Joe Cho (11-29-2023)
On all the 997.2 RS cars it was. About half the 3.8’s and 1/3 of the 4.0’s and 2RS’ didn’t have cupholders. The trim piece is carbon fiber with ‘RS 3.8’, ‘RS 4.0’, or ‘RS’ script on it. If the piece gets damaged or is delaminated/warped it is a near impossible piece to replace as it’s a very rare and a unique component for those specific models. The carbon fiber cup holders you’re more likely to find replacement’s (as it’s been used on other models), but still not super easy. The cupholders on a 4.0 has ‘RS 4.0’ script on it so it really isn’t possible to find replacement’s.
The following 2 users liked this post by RapidGT:
mikes70 (11-29-2023),
SupraSaiyan (11-30-2023)
On all the 997.2 RS cars it was. About half the 3.8’s and 1/3 of the 4.0’s and 2RS’ didn’t have cupholders. The trim piece is carbon fiber with ‘RS 3.8’, ‘RS 4.0’, or ‘RS’ script on it. If the piece gets damaged or is delaminated/warped it is a near impossible piece to replace as it’s a very rare and a unique component for those specific models. The carbon fiber cup holders you’re more likely to find replacement’s (as it’s been used on other models), but still not super easy. The cupholders on a 4.0 has ‘RS 4.0’ script on it so it really isn’t possible to find replacement’s.
On all the 997.2 RS cars it was. About half the 3.8’s and 1/3 of the 4.0’s and 2RS’ didn’t have cupholders. The trim piece is carbon fiber with ‘RS 3.8’, ‘RS 4.0’, or ‘RS’ script on it. If the piece gets damaged or is delaminated/warped it is a near impossible piece to replace as it’s a very rare and a unique component for those specific models.
But my issue is, if it’s OEM will it just warp again. So my thought cup holder has smaller pieces so less likely to warp? What causes it to warp, summer heat? I opted not to buy because I didn’t know these answers. Downside of dbcarbon is that it doesn’t have the 3.8 on it, upside is lifetime warranty obv
kinda reminds me when I bought 2 new speaker replacements from the factory, only to find out the woofer rubber also has the same chemical break down problem and was brittle (100% of us have this issue), so I ended up replacing my speakers with new matching spec 4ohm <150w, this worked out great but I had to deviate from OE which I don’t like to do on non-bolt ons.
Last edited by Wonderdan; 11-29-2023 at 09:15 AM.
The following 2 users liked this post by neurotic:
Elliotw44 (11-29-2023),
SupraSaiyan (11-30-2023)
... The trim piece is carbon fiber with ‘RS 3.8’, ‘RS 4.0’, or ‘RS’ script on it. If the piece gets damaged or is delaminated/warped it is a near impossible piece to replace as it’s a very rare and a unique component for those specific models. The carbon fiber cup holders you’re more likely to find replacement’s (as it’s been used on other models), but still not super easy. The cupholders on a 4.0 has ‘RS 4.0’ script on it so it really isn’t possible to find replacement’s...
so 6 months ago I went down this path because I have warping, at the time Germany had stock on the 3.8 ($900 through Gaudin vegas, price is redic imo but so is perfectionism lol )
But my issue is, if it’s OEM will it just warp again. So my thought cup holder has smaller pieces so less likely to warp? What causes it to warp, summer heat? I opted not to buy because I didn’t know these answers. Downside of dbcarbon is that it doesn’t have the 3.8 on it, upside is lifetime warranty obv
kinda reminds me when I bought 2 new speaker replacements from the factory, only to find out the woofer rubber also has the same chemical break down problem and was brittle (100% of us have this issue), so I ended up replacing my speakers with new matching spec 4ohm <150w, this worked out great but I had to deviate from OE which I don’t like to do on non-bolt ons.
But my issue is, if it’s OEM will it just warp again. So my thought cup holder has smaller pieces so less likely to warp? What causes it to warp, summer heat? I opted not to buy because I didn’t know these answers. Downside of dbcarbon is that it doesn’t have the 3.8 on it, upside is lifetime warranty obv
kinda reminds me when I bought 2 new speaker replacements from the factory, only to find out the woofer rubber also has the same chemical break down problem and was brittle (100% of us have this issue), so I ended up replacing my speakers with new matching spec 4ohm <150w, this worked out great but I had to deviate from OE which I don’t like to do on non-bolt ons.
I have configured the .2 RS I would do if I had the chance to do so. Unfortunately this configuration doesn’t exist.
2011 911 GT3 RS Base Price: $135,500
78 Black Full Leather
191 Lightweight Lithium-Ion Battery
450 Ceramic Composite Brakes-PCCB
490 Sound Package Plus
511 Contrast - White Gold Metallic
585 Cupholders
603 Dynamic Cornering Lights
619 Bluetooth Phone Interface
810 Floor Mats in Interior Color
870 Universal Audio Interface
B4 Carrara White
CYW Sun Visors Alcantara
XSC Porsche Crest on Headrests
XUB Headlight Cleaner Cover in Exterior Color
XXZ Foot Rest Aluminum
Original MSRP (after gas guzzler tax and destination charge): $154,355
2011 911 GT3 RS Base Price: $135,500
78 Black Full Leather
191 Lightweight Lithium-Ion Battery
450 Ceramic Composite Brakes-PCCB
490 Sound Package Plus
511 Contrast - White Gold Metallic
585 Cupholders
603 Dynamic Cornering Lights
619 Bluetooth Phone Interface
810 Floor Mats in Interior Color
870 Universal Audio Interface
B4 Carrara White
CYW Sun Visors Alcantara
XSC Porsche Crest on Headrests
XUB Headlight Cleaner Cover in Exterior Color
XXZ Foot Rest Aluminum
Original MSRP (after gas guzzler tax and destination charge): $154,355
On all the 997.2 RS cars it was. About half the 3.8’s and 1/3 of the 4.0’s and 2RS’ didn’t have cupholders. The trim piece is carbon fiber with ‘RS 3.8’, ‘RS 4.0’, or ‘RS’ script on it. If the piece gets damaged or is delaminated/warped it is a near impossible piece to replace as it’s a very rare and a unique component for those specific models. The carbon fiber cup holders you’re more likely to find replacement’s (as it’s been used on other models), but still not super easy. The cupholders on a 4.0 has ‘RS 4.0’ script on it so it really isn’t possible to find replacement’s.
The slot by the passengers door- umbrella?
On all the 997.2 RS cars it was. About half the 3.8’s and 1/3 of the 4.0’s and 2RS’ didn’t have cupholders. The trim piece is carbon fiber with ‘RS 3.8’, ‘RS 4.0’, or ‘RS’ script on it. If the piece gets damaged or is delaminated/warped it is a near impossible piece to replace as it’s a very rare and a unique component for those specific models. The carbon fiber cup holders you’re more likely to find replacement’s (as it’s been used on other models), but still not super easy. The cupholders on a 4.0 has ‘RS 4.0’ script on it so it really isn’t possible to find replacement’s.