Notices
997 Forum 2005-2012
Sponsored by:
Sponsored by:

What did you do to your 997 today?

Thread Tools
 
Search this Thread
 
Old 09-21-2023, 08:03 AM
  #14386  
GT3twenty10
Pro
 
GT3twenty10's Avatar
 
Join Date: Apr 2019
Location: Treasure Island FL and Albertville MN
Posts: 582
Received 359 Likes on 172 Posts
Default

Originally Posted by Amrit.boxer
thanks for the advice. love how it looks on your car! i'll have a look in to the tyre options. the local shops have all advised on 295/35/18 pilotsport ps2 N
305’s (cough)
GT3twenty10 is offline  
Old 09-21-2023, 11:59 AM
  #14387  
Recruiter_Bruno
Rennlist Member
 
Recruiter_Bruno's Avatar
 
Join Date: Oct 2018
Location: Richmond Hill, Ontario
Posts: 591
Received 230 Likes on 104 Posts
Default

Originally Posted by M3tro81
Suncoast “kit” is $4150 shipped and a local paint shop painted it for about $500. Plenty of aggravation though, not sure how to price that!

Suncoast’s description is that their kit is everything to convert to the .2, but it doesn’t come with a parts list and has required quite a bit of extra effort and ordering additional parts to get it sorted.

The headlight washer hose from the .1 isn’t long enough to fit the .2, the FVD harness didn’t come with instructions (had to ask for them and they aren’t really helpful) and didn’t look like it was going to stretch far enough so we’ve had to route it differently, screws required to mount the LEDs to the bumper weren’t included (they are $10 a piece!) to name a few.

The description says to reuse components from the .1 bumper and that some additional parts may be required - think it would have been less frustrating if there was a list of parts necessary and if they weren’t provided then at least we would know what to order.

The heartbreaking thing was that where the lower air guide connects actually cracked, either in transit, or to the painters and wasn't seen until after it had been painted. Without a known cause I was forced to find a way to repair and repaint.

I really dig the look of the front of the .2 so I’m happy with how it looks now, but has been a bit of a saga to get it right. If someone were to order this kit I would demand a parts list.
Its a shame that Suncoast of all places can't actually provide a complete kit to do the swap.
What baffles my mind is why all the 997.2 GT3 and GTS bumpers have completely disappeared after they climbed in prices for the last few years....
And even the front lips have tripled in price.
Recruiter_Bruno is offline  
The following users liked this post:
Liste-Renn (09-22-2023)
Old 09-21-2023, 12:31 PM
  #14388  
Rhern213
Rennlist Member
 
Rhern213's Avatar
 
Join Date: Sep 2022
Location: Miami, FL
Posts: 293
Received 179 Likes on 71 Posts
Default

Originally Posted by Recruiter_Bruno
Its a shame that Suncoast of all places can't actually provide a complete kit to do the swap.
What baffles my mind is why all the 997.2 GT3 and GTS bumpers have completely disappeared after they climbed in prices for the last few years....
And even the front lips have tripled in price.
Amen! You can get any other aero/gt3 kit including 997.1 any time, but the 997.2 is NA everywhere.
Rhern213 is offline  
Old 09-22-2023, 04:05 AM
  #14389  
Amrit.boxer
Track Day
 
Amrit.boxer's Avatar
 
Join Date: Jan 2021
Location: AKL, New Zealand
Posts: 23
Received 23 Likes on 10 Posts
Default

Originally Posted by GT3twenty10
305’s (cough)
which tyre model do ya recommend? few people said 305 but i can't seem to find pilotsport ps2 nor ps4 offering 305s for 18" wheels
Amrit.boxer is offline  
Old 09-22-2023, 04:12 AM
  #14390  
waterpanda
Rennlist Member
 
waterpanda's Avatar
 
Join Date: Jan 2022
Location: NJ
Posts: 216
Received 81 Likes on 44 Posts
Default

Not today, but took her up to Bear Mt a week ago
waterpanda is offline  
The following 8 users liked this post by waterpanda:
ATX_Native (09-22-2023), cjarrett (09-23-2023), EVOMMM (09-22-2023), frederickcook87 (09-23-2023), Graufuchs (09-22-2023), swish77 (09-22-2023), TheMurse (09-22-2023), VT Blue (09-29-2023) and 3 others liked this post. (Show less...)
Old 09-22-2023, 06:25 AM
  #14391  
Idoktr
Rennlist Member
 
Idoktr's Avatar
 
Join Date: Aug 2001
Location: Boston,MA
Posts: 523
Received 52 Likes on 21 Posts
Default

a
added FVD wing to rear spoiler.........
Idoktr is offline  
The following users liked this post:
dmpslc (09-22-2023)
Old 09-22-2023, 02:45 PM
  #14392  
MauritsK
Rennlist Member
 
MauritsK's Avatar
 
Join Date: Jun 2023
Location: At the farm house (Den Bosch area)
Posts: 29
Received 26 Likes on 14 Posts
Default

Added some goodies from the USA to my Dutch 997.1 C2S.

Slapped on Magnagrafik stoneguards (thanks Dan for the extremely fast delivery all the way into the Netherlands);



Added Emc2 rear splitters (also, thanks for the service guys!):





MauritsK is offline  
The following 3 users liked this post by MauritsK:
Amrit.boxer (09-24-2023), BillB128 (09-22-2023), Graufuchs (09-22-2023)
Old 09-22-2023, 10:12 PM
  #14393  
Liste-Renn
Rennlist Member
 
Liste-Renn's Avatar
 
Join Date: Jul 2016
Location: Kailua Beach, Oahu
Posts: 1,793
Received 1,351 Likes on 616 Posts
Default

Originally Posted by Recruiter_Bruno
And even the front lips have tripled in price.
And how!
https://www.suncoastparts.com/product/50598306G2L.html
https://www.suncoastparts.com/product/50598305.html
https://www.suncoastparts.com/product/50598303.html


Just absolutely obscene price increases for an expendable item that might have to be eventually replaced... even if careful. And shipping, due to over-size box dimensions, is another gob-smacker.

A 997.2 Carrera Aerokit has been absolute unobtanium for years now, as well.
Liste-Renn is offline  
Old 09-22-2023, 10:24 PM
  #14394  
Petza914
RL Community Team
Rennlist Member
 
Petza914's Avatar
 
Join Date: Oct 2007
Location: Clemson, SC
Posts: 25,929
Received 6,529 Likes on 4,158 Posts
Default

Pretty soon my used noselift kit will be cheaper than a couple of lips LOL
Petza914 is offline  
The following 2 users liked this post by Petza914:
Liste-Renn (09-24-2023), TerrestrialFlyte (09-23-2023)
Old 09-22-2023, 11:57 PM
  #14395  
M3tro81
Rennlist Member
 
M3tro81's Avatar
 
Join Date: May 2021
Posts: 64
Received 40 Likes on 14 Posts
Default

EMC2 front spoiler installed. Now she’s a bit of a Frankenstein - 997.1 with 997.2 front bumper and 991 front spoiler, but I really like the look! Now the “kit” from EMC2 is very well designed, installs easily and the support from their team is great. Suncoast could learn a lot from them!




M3tro81 is offline  
The following 2 users liked this post by M3tro81:
ATX_Native (09-23-2023), Uwon (09-24-2023)
Old 09-23-2023, 12:11 PM
  #14396  
david
Addict
Lifetime Rennlist
Member
 
david's Avatar
 
Join Date: Aug 2001
Location: North Bay
Posts: 1,479
Received 64 Likes on 50 Posts
Default

Thanks for the field report that Magnagraik (and hopefully Dan) are back in the saddle and making these great products again in a timely manner!

I've had nothing but great utility from these stone guards: I feel that the material / process that Dan utilizes makes the best, long-lasting product.

Remember that they are best removed for cleaning both the material and leading edges where dirt will collect...

Originally Posted by MauritsK
Added some goodies from the USA to my Dutch 997.1 C2S.

Slapped on Magnagrafik stoneguards (thanks Dan for the extremely fast delivery all the way into the Netherlands);



Added Emc2 rear splitters (also, thanks for the service guys!):



david is offline  
Old 09-23-2023, 06:56 PM
  #14397  
frederickcook87
Racer
 
frederickcook87's Avatar
 
Join Date: Sep 2015
Location: Atlanta
Posts: 319
Received 91 Likes on 51 Posts
Default


Been eyeing this for a while, finally pulled the pin on it
frederickcook87 is offline  
The following users liked this post:
Ohio Performance (09-24-2023)
Old 09-23-2023, 07:17 PM
  #14398  
frybear
Pro
 
frybear's Avatar
 
Join Date: Apr 2021
Location: Highland Park, IL
Posts: 663
Received 213 Likes on 134 Posts
Default

Originally Posted by Amrit.boxer
just got myself some wheels as a bday treat. used but look to be in good condition. planned up a bit of simple DIY for this years upcoming service cycle. ceratec and mobil 1 ready, need to paint the calipers too and stop procrastinating removing front bumper to clean up the radiators.

can't wait to put them on when they arrive. going from the stock 10.5" wide rims to 11" width so seems i'll sadly need to get new pair of rear pilot sports as my stock ones are 265/40/18,, real shame because i only recently got them but atleast can reuse the fronts.

Are those Victors? I believe I have a set in 18" lying around waiting for all season rubber to go on later this year.
frybear is offline  
Old 09-23-2023, 07:18 PM
  #14399  
frybear
Pro
 
frybear's Avatar
 
Join Date: Apr 2021
Location: Highland Park, IL
Posts: 663
Received 213 Likes on 134 Posts
Default

Originally Posted by david
Thanks for the field report that Magnagraik (and hopefully Dan) are back in the saddle and making these great products again in a timely manner!

I've had nothing but great utility from these stone guards: I feel that the material / process that Dan utilizes makes the best, long-lasting product.

Remember that they are best removed for cleaning both the material and leading edges where dirt will collect...
Glad he's back. Unfortunately I couldn't wait so I got a set from TX Targa on Rennlist. His are a little bit larger than the magnagrafik version. So far they've held up at around 90mph or so.
frybear is offline  
The following users liked this post:
tx targa (09-24-2023)
Old 09-24-2023, 06:48 AM
  #14400  
Amrit.boxer
Track Day
 
Amrit.boxer's Avatar
 
Join Date: Jan 2021
Location: AKL, New Zealand
Posts: 23
Received 23 Likes on 10 Posts
Default

Originally Posted by frybear
Are those Victors? I believe I have a set in 18" lying around waiting for all season rubber to go on later this year.
yes indeed. victor equipment turismo set.

today i got started on my yearly service. alongside some planned painting of the calipers to help them pop a bit when the new wheels arrive.

just managed to jack up and do Oil flush/change with some ceratec and mobil1 today.

todo: engine mounts, Air filter, change front brake pads, coil packs and spark plugs (hopefully this won’t turn out to be very annoying, want to try do it without removing the muffler as that was a pain last time I did).

Later on the to do list is water pump, drive belt and changing the brake fluid but hopefully will find some help for that from a nearby friend who is a bit more experienced doing this kind of work



Last edited by Amrit.boxer; 09-24-2023 at 06:50 AM.
Amrit.boxer is offline  


Quick Reply: What did you do to your 997 today?



All times are GMT -3. The time now is 05:41 PM.