What did you do to your 996TT today?
#2506
Meridian looks great, it's Nice to have a car that changes colors. I know, i've got one just like yours.
Mine is in The hospital.
What a minor Oil drop does. As The motor is down I changed a lot of things that appear not right. A little noise in The exaust, and is changed. I'm at €8.000 already, and counting. But it will be like new.
Mine is in The hospital.
What a minor Oil drop does. As The motor is down I changed a lot of things that appear not right. A little noise in The exaust, and is changed. I'm at €8.000 already, and counting. But it will be like new.
#2507
Bypassed my clutch safety switch. (Another new switch did not cure it ... eff it ... fixed for good now!)
Superglued the central locking button into the horseshoe (Tabs just would not lock it solid)
Washed her and put her to bed for the night.
Superglued the central locking button into the horseshoe (Tabs just would not lock it solid)
Washed her and put her to bed for the night.
#2508
Removed the safety film on my windshield I put on the car a couple of years ago.
Looks like that saved me 1 or 2 windshields due to rock impacts.
Installing a new safety film in the next few days.
Looks like that saved me 1 or 2 windshields due to rock impacts.
Installing a new safety film in the next few days.
Last edited by 996TWINS; 05-18-2016 at 07:20 PM.
#2511
I removed the CD storage drawers that were below the radio head unit, and replaced them with another cubby (like the one below), so there are now two cubbies stacked on top of each other. I drilled a hole in the top cubby and routed the aux cable that's hooked up to my CDR 220 through the hole, and now I plug in my phone to the aux jack and leave it in the cubby while I drive. Very easy way to handle to the aux input, and also cleans up the look of the center stack.
#2512
And no, my mind is set to "keep it stock, keep it stock" for now. )
#2516
#2517
#2518
Busy day...
Got it back from detailing, headlight refinishing, paintless dent removal (fixing the side after the blowout and some other small stuff) and servicing. Not cheap but man it looks good now.
Also got my refinished stock wheels put on it - so I have a set of 997TT with rear spacers and bolts F/S now.
Oh yes and I added a UMW tune. That pepped it up a bit.
Got it back from detailing, headlight refinishing, paintless dent removal (fixing the side after the blowout and some other small stuff) and servicing. Not cheap but man it looks good now.
Also got my refinished stock wheels put on it - so I have a set of 997TT with rear spacers and bolts F/S now.
Oh yes and I added a UMW tune. That pepped it up a bit.
#2519
Something like this I bet
#2520
Finished today...new water pump, thermostat, rear rotors and pads, new brake fluid, new plugs, new coils, new Rennline engine mounts - used blue street/track inserts. The new QuickJack lift made this some reasonably easy work.
Make sure to pull on your boost hoses after replacing the clips. I didn't and promptly blew a hose off during the test drive 😂
Make sure to pull on your boost hoses after replacing the clips. I didn't and promptly blew a hose off during the test drive 😂