992.2 Info
https://www.evo.co.uk/porsche/911/20...be-electrified
This article shows uncamouflaged headlights, see below (another questionable design choice, not really liking these):
I prefer 991.1 to 991.2 and 991.2 to 992.1 and 992.1 to 992.2.
I would love a 991.2 engine in a 991.1 body and I really dont like 992 in general but 992.1 is acceptable vs 992.2 is really “lost”.
Last edited by 3-Pedals; Mar 15, 2024 at 07:04 PM.
Last edited by Bluehighways; Mar 15, 2024 at 09:06 PM.
48V optimizes wiring, allows a small battery to continue uninterrupted accessory operation in engine stop conditions, smooths out the starter operation in start conditions, takes some load off of the engine by powering accessories, and has mild regen braking.
All of this is to take load off of the combustion engine. Any additional power from a 48V is very minimal and unnoticeable - around 10hp typically only applicable when taking off from a stop, so it does not add to total peak horsepower. Porsche has used this in SUV's for the past 6 years... and about 10% of vehicles being made now have this. 48V systems purely an efficiency play more than anything.
What do you think it does?
48V optimizes wiring, allows a small battery to continue uninterrupted accessory operation in engine stop conditions, smooths out the starter operation in start conditions, takes some load off of the engine by powering accessories, and has mild regen braking.
All of this is to take load off of the combustion engine. Any additional power from a 48V is very minimal and unnoticeable - around 10hp typically only applicable when taking off from a stop, so it does not add to total peak horsepower. Porsche has used this in SUV's for the past 6 years... and about 10% of vehicles being made now have this. 48V systems purely an efficiency play more than anything.
What do you think it does?
That's why I say, given what we know now (if accurate) - if I were buying the 992.2 otherwise, just give me the real hybrid and I'll take my chances as a beta tester.
Last edited by nyca; Mar 16, 2024 at 11:54 AM.
48V optimizes wiring, allows a small battery to continue uninterrupted accessory operation in engine stop conditions, smooths out the starter operation in start conditions, takes some load off of the engine by powering accessories, and has mild regen braking.
All of this is to take load off of the combustion engine. Any additional power from a 48V is very minimal and unnoticeable - around 10hp typically only applicable when taking off from a stop, so it does not add to total peak horsepower. Porsche has used this in SUV's for the past 6 years... and about 10% of vehicles being made now have this. 48V systems purely an efficiency play more than anything.
What do you think it does?
The Best Porsche Posts for Porsche Enthusiasts
The standard bumper is probably used for EPA measurements, so it needs to be as aerodynamic as possible.
In the 992.1, the optional Sport Design bumper can be purchased, which does away with the horizontal automatic louvers.
The top tier 992.1 "halo" 911s (GTS models, GT/GT3 models, Dakar) do not have automatic louvers.
Based on this, the "regular" 992.2 models (Base, T, and S) will all have automatic vertical louvers.
An optional Sport Design bumper will be offed that will have open air inlets.
Also, "halo" cars (GTS, GT/GT3, Dakar, that are offered) will all have open air inlets.
I believe the recent spy shots of the front bumper with the fixed horizontal slats is the 992.2 sport design bumper.
(Be careful not to be confused by spy shots showing horizontal slats with vertical slats behind them; the horizontal slats in those spy shots are just camouflage in front of the actual movable vertical stats of the standard bumper).
Last edited by PSPorsche; Mar 16, 2024 at 10:42 PM.

If you imagine away the louvres/flaps, the bumper doesn't actually look too different from the current SD bumper. The big openings on both sides are somewhat the same shape, only real difference being that the new SD version as a whole is more angular (whereas the old one is more round according to the entire classic design language of the 911) and instead of the diagonal beam or bar like design elements on both sides of the center of the bumper, which in the old one are in the color of the exterior paint, you have now black plastic with some questionable design and additional holes/air channels in those elements.
Too lazy to post any pictures but one should be able to see this quite clearly from the pics of the old and new SD bumper next to each other. Beats me why Porsche now has decided to put the louvres/flaps also in the SD bumper. (Perhaps Porsche is still pulling our leg in these pre-launch pics...or then not.) In any case, I believe the horizontal flaps in the other new, indeed regular bumper design are functional in the similar fashion as to the current ones.
And btw, fully agree to the comments above stating that the new headlight design seems a bit blaah.. It used to be that 911 always had the most beautiful headlights, especially in the most upgraded form (PDLS+/Matrix etc...) and regardless of the model series. Now it seems like they're trying to force the same rough headline design into all of their models (Taycan, Panamera, Macan, Cayenne, 718) with no real differentiation.. It's such a pity!
Last edited by TheGreatJ; Mar 17, 2024 at 08:27 PM. Reason: Added comment regarding the lights.

Too lazy to post any pictures but one should be able to see this quite clearly from the pics of the old and new SD bumper next to each other.
As someone said earlier, ……..[/QUOTE]
He was absolutely right. My conviction in this particular matter has a limit!




