What did you do to your 991 turbo today?
03-11-2021, 10:37 PM
#2566
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Getting ready for Spring roll out, only a few weeks to go (hopefully).
Installed mesh grills
And had the OEM aerokit painted/installed with gloss black RS side skirts
Installed mesh grills
And had the OEM aerokit painted/installed with gloss black RS side skirts
__________________
991.2 GT3 RS Weissach Racing Yellow
991.2 Turbo S GT Silver
991.2 GT3 Chalk (Manual)
2022 Cayenne White
former 1972 911T white, 1984 911 3.2 Targa black, 993 cab white, 993TT arena red, 993TT silver, 996TT speed yellow, 991.1 GT3 white
www.speedtechexhausts.com
info@speedtechexhausts.com
Testimonials SpeedTech Exhaust Videos facebook
991.2 GT3 RS Weissach Racing Yellow
991.2 Turbo S GT Silver
991.2 GT3 Chalk (Manual)
2022 Cayenne White
former 1972 911T white, 1984 911 3.2 Targa black, 993 cab white, 993TT arena red, 993TT silver, 996TT speed yellow, 991.1 GT3 white
www.speedtechexhausts.com
info@speedtechexhausts.com
Testimonials SpeedTech Exhaust Videos facebook
03-11-2021, 11:08 PM
#2567
Rennlist Member
Join Date: Aug 2017
Location: Metro Atlanta, GA area
Posts: 7,223
Received 2,102 Likes
on
1,324 Posts
LOOKS AWESOME!! ^^^
The following users liked this post:
John D II (03-11-2021)
03-12-2021, 05:01 PM
#2568
Just a little upgrade...added the red dial to my sport chrono clock.
It was like surgery though, not for those without a shred of patience or without steady hands. Easy overall but definitely a couple of places for frustrating (and expensive) error.
Came out good though! Looks so much sportier than the boring black dial. I'm probably going to do the RPM dial next. (I don't want all of my gauge's red - just the center RPM and sport chrono clock dials.
The only "inexpensive" RPM dial I could find was from fleabay and says "Turbo" on it. Not Turbo S. It's also not a perfect match to the red on the sport chrono dial (probably not really noticeable installed), but I'm still on the fence about installing that one.
I just can't fathom the price of a complete, factory Turbo S red gauge face set, when I only want the RPM dial. Searching around for those complete kits, they're going for like $700! Crazy.
A mock up. Not sure I can live with "Turbo" on my gauge face...in a Turbo S. I don't want to spend $700 either.
It was like surgery though, not for those without a shred of patience or without steady hands. Easy overall but definitely a couple of places for frustrating (and expensive) error.
Came out good though! Looks so much sportier than the boring black dial. I'm probably going to do the RPM dial next. (I don't want all of my gauge's red - just the center RPM and sport chrono clock dials.
The only "inexpensive" RPM dial I could find was from fleabay and says "Turbo" on it. Not Turbo S. It's also not a perfect match to the red on the sport chrono dial (probably not really noticeable installed), but I'm still on the fence about installing that one.
I just can't fathom the price of a complete, factory Turbo S red gauge face set, when I only want the RPM dial. Searching around for those complete kits, they're going for like $700! Crazy.
A mock up. Not sure I can live with "Turbo" on my gauge face...in a Turbo S. I don't want to spend $700 either.
Last edited by MotoJB; 03-14-2021 at 01:52 PM.
The following 3 users liked this post by Phattymcgee:
The following 3 users liked this post by buffalosojah:
03-13-2021, 10:30 AM
#2572
RL Community Team
Rennlist Member
Rennlist Member
Thread Starter
Made it jealous by taking out the 'Other German'...
The following users liked this post:
Beezupra (03-13-2021)
03-13-2021, 04:00 PM
#2574
RL Community Team
Rennlist Member
Rennlist Member
Thread Starter
Has anyone else had problems loading the DSC software onto their PCs or laptops?
I can unzip the files, allow the executable, but for some reason cannot load it up, on both my PC and laptop.
Canadian distributor is not aware of any known problems...
Cheers,
I can unzip the files, allow the executable, but for some reason cannot load it up, on both my PC and laptop.
Canadian distributor is not aware of any known problems...
Cheers,
03-13-2021, 04:12 PM
#2575
Rennlist Member
Join Date: Aug 2017
Location: Metro Atlanta, GA area
Posts: 7,223
Received 2,102 Likes
on
1,324 Posts
Just installed my Zunsport Grillz
Y'all have seen them so no need for pics really.
However, I can say I'm not as impressed with the fit on these as I was for my 997.2 TTS. These small vents don't make it easy I'm sure.
They're there for a functional reason, so I'm trying not to pick at it too much.
Y'all have seen them so no need for pics really.
However, I can say I'm not as impressed with the fit on these as I was for my 997.2 TTS. These small vents don't make it easy I'm sure.
They're there for a functional reason, so I'm trying not to pick at it too much.
The following 2 users liked this post by Phattymcgee:
Hellcat707 (03-19-2021),
MotoJB (03-13-2021)
03-13-2021, 07:27 PM
#2577
RL Community Team
Rennlist Member
Rennlist Member
Thread Starter
Just installed my Zunsport Grillz
Y'all have seen them so no need for pics really.
However, I can say I'm not as impressed with the fit on these as I was for my 997.2 TTS. These small vents don't make it easy I'm sure.
They're there for a functional reason, so I'm trying not to pick at it too much.
Y'all have seen them so no need for pics really.
However, I can say I'm not as impressed with the fit on these as I was for my 997.2 TTS. These small vents don't make it easy I'm sure.
They're there for a functional reason, so I'm trying not to pick at it too much.
The following users liked this post:
Big Swole (03-15-2021)
03-13-2021, 10:02 PM
#2578
Burning Brakes
Just a little upgrade...added the red dial to my sport chrono clock.
It was like surgery though, not for those without a shred of patience or without steady hands. Easy overall but definitely a couple of places for frustrating (and expensive) error.
Came out good though! Looks so much sportier than the boring black dial. I'm probably going to do the RPM dial next. (I don't want all of my gauge's red - just the center RPM and sport chrono clock dials.
The only "inexpensive" RPM dial I could find was from fleabay and says "Turbo" on it. Not Turbo S. It's also not a perfect match to the red on the sport chrono dial (probably not really noticeable installed), but I'm still on the fence about installing that one.
I just can't fathom the price of a complete, factory Turbo S red gauge face set, when I only want the RPM dial. Searching around for those complete kits, they're going for like $700! Crazy.
A mock up. Not sure I can live with "Turbo" on my gauge face...in a Turbo S. I don't want to spend $700 either.
It was like surgery though, not for those without a shred of patience or without steady hands. Easy overall but definitely a couple of places for frustrating (and expensive) error.
Came out good though! Looks so much sportier than the boring black dial. I'm probably going to do the RPM dial next. (I don't want all of my gauge's red - just the center RPM and sport chrono clock dials.
The only "inexpensive" RPM dial I could find was from fleabay and says "Turbo" on it. Not Turbo S. It's also not a perfect match to the red on the sport chrono dial (probably not really noticeable installed), but I'm still on the fence about installing that one.
I just can't fathom the price of a complete, factory Turbo S red gauge face set, when I only want the RPM dial. Searching around for those complete kits, they're going for like $700! Crazy.
A mock up. Not sure I can live with "Turbo" on my gauge face...in a Turbo S. I don't want to spend $700 either.
03-13-2021, 10:04 PM
#2579
Burning Brakes
....You don't care for the current file or just testing the waters ?...mine is still in the box and car still asleep
03-13-2021, 10:32 PM
#2580
Maybe a little assistance here
https://youtu.be/7P7LmgxGZGA
https://youtu.be/7P7LmgxGZGA
