HICKS

Put on black stone guards, and replaced the hood crest.

EliteThink

Hood crest decal?

can we see your models? :-)

locke

Resealed the upper balancing shaft



Phenolic spacers



Resealed aos



Started polishing intake manifold

use2windsurf

Installed new front wheel bearings, rotors and brake pads. Converted front struts and installed Koni sport strut inserts.

laneskelton

I installed a "new" hatch spoiler center section on my 944 and took off the awful 3rd brake light that the PO had installed.

locke

Finished putting on everything else relevant to the car running. No leaks on anything first try. Feeling smug.

HICKS

You talking about my toys on the wall?

racerbvd

Picked up some food

Course that was after I pulled off the 17" "Twist" for the powder coated Club Sports

Cyberpunky

Friday night coming home from work I went to put on headlights and they didn't come up. I stopped at a servo as needed fuel anyway and saw lights were half up. Tried switching on and off a few times and nothing. I checked out mechanism and nothing seemed broken or loose. I then tried to wiggle each headlight and noticed right had some play but left was locked solid.

I decided to try a little persuasion and heard a clink. Turns out the lens had separated from reflector and had jammed it up. After breaking the lens it was easy to get glass out and no damage was done to lifting set up. I got new one on Monday and fitted it Monday night.

Removing the reflector from the mounting braket was a major PITA, as was fitting new one to it. Has anyone else had this happen ?

azbanks

Assembled the Weltmeister sway bar with new grade 8 hardware and some new parts from Paragon. The last two pieces should be in today and then it will be ready to go on the car.

morghen

Cleaned and re-installed the seatbelts (jammed rear locking-tongues) and rear quarter pannels(they were not properly installed)

locke

Yesterday put on the front sway bar and p/s reservoir. Today put on the ploy rear sway bar bushings, rear stainless steel brake lines, filled the transmission with swepco 201, and put on the only944.com shifter bar linkage thingy which greatly lightened up the shifting.

V2Rocket

did laundry and found a porsche badge seal in the dryer...

laneskelton

I installed a hatch seal and some new stainless hatch pins along with some stainless license plate bolts and nuts.

ForceReconTrojan

I have colored belts on my new Porsche but where does one find red belts for a 944?

thanks!