Darwantae951

Didn't "physically" do anything to it today but I did buy some pretty neat stuff for my 3.1L build.

krystar

nah. all yer oil's in yer pan already by now.

but after u put everything together and verify it's running, u'll want to change yer oil

ETC? heh

cparkin

ran into a piece of metal on the highway that gouged my front bumper... not much other than that.

JimGinKC

drove my S2 cab today

krazykarl

Bought 7 quarts of Mobil 1 15W-50 today in preparation. ETC? Estimated time of completion? Still waiting on the cylinder head, but I'm hoping I'll have it running by next week in time for an autocross event.

lovemyp-car

hehe, well i started stripping the paint off! i'm going down to factory primer, maybe even bare metal if i so choose...i'm tired of the rustoleum on top of mismatched improperly cleared maaco on top of thin factory paint that's barely there at all....

i'll be spending most of my tomorrow getting more paint off!

1303RS

Today on the way to work, The odo hit 55,000 miles.

V2Rocket

drove 100+ miles hearing a strange clunking noise, doing some 4-wheel drifts and 100+mph on the freeway and got home and discovered that 5 out of 6 bolts on my passenger wheelside axle were loose, 4 completely backed out...along with the drivers side torsion tube chassis mount. all were torqued maybe 3 weeks ago to factory specs. (triple checked) no idea what happened.

tightened everything up and had no more clunks!

1985porsche944

Finishing up the clutch job, have to put exhaust back on still.

KuHL 951

Loctite is pretty much mandatory on those axle bolts even with proper torque. I've had that happen at the worst times but not once since using Loctite blue

83 944

i looked to see if my baby was still in the drive way.

then put my AFM back on the car and the DME started her up and let her run for a min.

what a day im ppooped

Eastep

hauled a door and other stuff in it...last week was lumber

83 944

=[ that depresses me ..im sorry you have to do that.

V2Rocket

id imagine driving around with the hatch up isnt the best idea in the world.


just pulled out part of the floorpan carpet to make a new piece from fresh stock i have. now to take out the center console to get the other half out...adding some more insulation too.

83 944

spencer where do you get your carpet from i would love to redo mine since the old whole in my battery box made mine ikkky