Notices

Any Rennlisters from New Zealand?

Thread Tools
 
Search this Thread
 
Old 05-20-2015, 02:32 AM
  #25831  
Kiwi Carguy
Burning Brakes
 
Kiwi Carguy's Avatar
 
Join Date: Oct 2003
Location: Kapiti - New Zealand
Posts: 1,239
Received 0 Likes on 0 Posts
Default

Originally Posted by Macca
You are right on the button there Graeme.

I swapped the seat cushions from driver to passenger for the Bambina and it made a difference I think.

Ive done 20,000 km on the old cushions and I think they have given their best and compressed a bit now. The passenger ones have done less work. When I had the seats built I asked for the passenger cushion to be made 20mm thicker for my wife and they felt a bit better. I also asked to have a set made in leather (rather than the Alacantera ones Ive been using all this time). Those are in storage and have never been used so I may get them out and put them in when I tour again next. By the time I wear those through I suspect the seats themselves will need recovering. The driver side inner thigh leather is getting rather shiny and worn by now. I reckon they will give another 20,000 km before they need a rebuild. By then she will get paint and a image change in any case :-)
Oh so thats why I got such a sore ****! Didn't tell me that one Macca
Old 05-20-2015, 03:13 AM
  #25832  
Macca
Rennlist Member
 
Macca's Avatar
 
Join Date: Apr 2002
Location: New Zealand
Posts: 14,140
Received 14 Likes on 13 Posts
Default

Originally Posted by Kiwi Carguy
Oh so thats why I got such a sore ****! Didn't tell me that one Macca
Sorry mate. I figured you'd prefer the driver to be comfortable....;-p
Old 05-20-2015, 04:30 AM
  #25833  
gt38088
Three Wheelin'
 
gt38088's Avatar
 
Join Date: Feb 2007
Location: New Zealand
Posts: 1,437
Received 14 Likes on 12 Posts
Default

Originally Posted by Macca
Sorry mate. I figured you'd prefer the driver to be comfortable....;-p
haha nice one
I mean 2 types of density in the same cushion
Old 05-20-2015, 04:37 AM
  #25834  
Macca
Rennlist Member
 
Macca's Avatar
 
Join Date: Apr 2002
Location: New Zealand
Posts: 14,140
Received 14 Likes on 13 Posts
Default

Originally Posted by gt38088
haha nice one I mean 2 types of density in the same cushion
Graeme - any idea who could do these?
Old 05-20-2015, 05:27 AM
  #25835  
O2GO
Drifting
 
O2GO's Avatar
 
Join Date: May 2013
Location: Auckland, New Zealand
Posts: 2,373
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 996tnz
Crossed that one off before Easter 2015. A nice drive. Big barren landscape and cool rusty dozers :-P

Originally Posted by John McM
You are right. Actually, Cape Reinga appears to take care of Northern and Western extremes for the North Island as well. It would appear that we should run down Cape Reinga, East Cape to Cape Pallliser.
Cunning.

Originally Posted by John McM
It's all relative Dave the 964s are 25 years old this year. Go cars not show cars. Doug, are we looking at a weekend to drive this, then fly back with cars to be collected later?
That's a good option but I think we'd need a 3 day weekend. Leave to run north on Thursday night and fly home from Wellington Sunday night. Or do the Cape Reinga run as a shake down a week prior to the East Cape, Cape Palliser run. Flying back breaks it up nicely.
Old 05-20-2015, 05:51 AM
  #25836  
racoguy
Racer
 
racoguy's Avatar
 
Join Date: Feb 2014
Location: Auckland NZ
Posts: 367
Received 149 Likes on 82 Posts
Default

Originally Posted by Macca
Graeme - any idea who could do these?
Skellerup make lots of different foams
Old 05-20-2015, 08:02 AM
  #25837  
gt38088
Three Wheelin'
 
gt38088's Avatar
 
Join Date: Feb 2007
Location: New Zealand
Posts: 1,437
Received 14 Likes on 12 Posts
Default

Originally Posted by Macca
Graeme - any idea who could do these?
Get the foams off Racetech and use a local upholsterer to cut to fit your cushions size. Or send the whole cushion to them to do. key is the dual density.

For my race seat I found the original soft foams too soft and the hard shell seat becomes uncomfortable. I ordered another cushion made from higher density foam no soft foam on top cos I wanted max feel. co driver side now sits on double soft foam.
Old 05-20-2015, 06:47 PM
  #25838  
Macca
Rennlist Member
 
Macca's Avatar
 
Join Date: Apr 2002
Location: New Zealand
Posts: 14,140
Received 14 Likes on 13 Posts
Default

Thanks guys for the foam advice!
Old 05-20-2015, 06:50 PM
  #25839  
Macca
Rennlist Member
 
Macca's Avatar
 
Join Date: Apr 2002
Location: New Zealand
Posts: 14,140
Received 14 Likes on 13 Posts
Default

I have updated the information on the SITT. We now have venues and dates.

We need to establish numbers for the event. If there are any on here (or friends they may know) not RSG members who would like to spend time on the four SI tracks in March 2016 please PM me. We need to firm up numbers by the end of May. At this stage I had Spokes (Stephen) & Shiraz (David) as possibles for Cromwell. However it would be good if we could raise our numbers for all four tracks from the 20 that have already indicated attendance...

Thnx
Old 05-20-2015, 07:04 PM
  #25840  
996tnz
Three Wheelin'
 
996tnz's Avatar
 
Join Date: Oct 2010
Posts: 1,802
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by gt38088
Get the foams off Racetech and use a local upholsterer to cut to fit your cushions size. Or send the whole cushion to them to do. key is the dual density.
Great advice Graeme. As a bonus, Racetech could do it to race car standards, using minimally combustible materials.
Old 05-20-2015, 07:25 PM
  #25841  
mikey_audiogeek
Three Wheelin'
 
mikey_audiogeek's Avatar
 
Join Date: Oct 2004
Location: Northland, New Zealand
Posts: 1,547
Received 8 Likes on 7 Posts
Default

Originally Posted by Thesnowman
New radiator arrived this am, power steering hoses should be ready today.


My leaky OEM radiator will be off to Fenix later this week so they can copy it and have a local alternative (great for 944 owners here and in Aus)
Nice! Is that a PWR 6040?

http://www.pwr.com.au/portfolio/porsche-car-radiators

Cheers,
Mike
Old 05-20-2015, 07:28 PM
  #25842  
RS ZWEI
Pro
 
RS ZWEI's Avatar
 
Join Date: Sep 2010
Location: Napier, New Zealand
Posts: 511
Likes: 0
Received 0 Likes on 0 Posts
Default

Chris Harris driving the 991 GT3 RS:

Old 05-20-2015, 08:28 PM
  #25843  
John McM
Rennlist Member
 
John McM's Avatar
 
Join Date: May 2001
Location: Auckland, New Zealand.
Posts: 13,247
Received 589 Likes on 351 Posts
Default

Originally Posted by Macca
I have updated the information on the SITT. We now have venues and dates.

We need to establish numbers for the event. If there are any on here (or friends they may know) not RSG members who would like to spend time on the four SI tracks in March 2016 please PM me. We need to firm up numbers by the end of May. At this stage I had Spokes (Stephen) & Shiraz (David) as possibles for Cromwell. However it would be good if we could raise our numbers for all four tracks from the 20 that have already indicated attendance...

Thnx
Lucky you posted the dates as I'd applied for leave starting on the second week. If there are options to select specific tracks, then I will think over my plans. I'll knock Slope Point off my bucket list while you tame Teretonga and will play photographer at Highlands, but Levels and Ruapuna are Herman friendly so that could be a way to help out the RSG coffers. I will definitely be in the whole Queenstown house section and have film ideas for the Crown Range. We just need a good drone owner/operator.
Old 05-21-2015, 01:32 AM
  #25844  
kiwi 911
Rennlist Member
 
kiwi 911's Avatar
 
Join Date: Apr 2012
Location: Auckland, New Zealand
Posts: 3,717
Received 5 Likes on 3 Posts
Default

Chris T,

I was the dude waving to you on the corner of Gudgeon St (outside URS blding).

Mate - that RS4 is sounding like a weapon..............

Cheers
PJ
Old 05-21-2015, 03:40 AM
  #25845  
Moochier
Instructor
 
Moochier's Avatar
 
Join Date: Feb 2015
Location: Auckland, New Zealand
Posts: 232
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by kiwi 911
Chris T,

I was the dude waving to you on the corner of Gudgeon St (outside URS blding).

Mate - that RS4 is sounding like a weapon..............

Cheers
PJ
Yeah Paul, did recognise you but couldn't stop as running late for meeting with lawyer. My office is just 50m up that road.

Yeah cheers, that V8 of the RS4 does sound good.... I haven't listened to the radio in that car since I installed the miltek system 3yrs ago!

Just as well I like driving that as it'll probably be at least a month before I get the R back. It was the wire on the fence that did the most damage.


Quick Reply: Any Rennlisters from New Zealand?



All times are GMT -3. The time now is 06:25 AM.