lml999

@Userix That would be a question for the 9y0 forum, rather than the 958 forum...

970d

hello, can i ask you a quick question? can't find the answer anywhere 😞
I've activated boost gauge via x431 on 970 diesel, but it won't show any boost. Stays at 0 all the time. Do i need to activate anything else to make it work? yep, the engine definitely making boost))
thanks in advance 🙏🏼

twodollardoug

You probably have to activate something else. More research.

970d

unfortunately haven't found anything else except boost scale. be appreciated for any input

TDS

It works in the cluster display on my 958.2, only activated in the cluster nowhere else.

cayenneshybridmm

Hi, If we change the Cayenne Model Logo on cluster with this coding, does it also change the Model Logo displayed on PCM when we turn on the ignition ? Thanks

TDS

No you would have to code the headunit separately to adjust it.

cayenneshybridmm

Does this device also code the headunit ? or does it need other device to code it ? How to code the headunit ?

TDS

I'm not sure what you are using I use piwis, I have a pcm 4 not sure on the 3.1 but it won't be difficult I assume.

cayenneshybridmm

Sorry, I meant with LAUNCH X431 V+ PRO 4.0. Does it also code the headunit ? or do I need PIWIS ? Thanks

JUN6817

please teach me to activate LDW to LKA on video..

Whitegalaxie

I figured out how to disable the Start/stop function on a 2016 GTS or at least have it set so when you start the car the start stop function automatically sets to its last setting. I tried gateway and front end electronics and although I deactivated there in the areas that would accept the coding, the start stop was still active. BUT go to the AC module under codings and deactivate there, I think in two places. I shut off the car, locked it twice and got back in and turned on ignition. Start/stop light illuminates immediately before engine even cranks.
IhHope this helps people that hated this function as I did.

Whitegalaxie

Coding update for start/stop. After coding in AC module I can confirm the start/stop defaults to the last position set when the ignition is turned off. With start stop deactivated it will be deactivated when you restart the car. Have it activated and when car is restarted it will default to activated.

Userix

which two places in the ac module did you code? Which coding in the front end electronics and gateway did change? Thanks

Whitegalaxie

I am not certain the front end start stop areas have to be coded out or not. I coded the front end ones months ago but still the star/stop worked per the factory programming. Only after finding start/stop in AC coding section does the start stop resume in the position it was in when the ignition was turned off.