Cayenne Coding - The Ultimate Guide & Discussion
#1576
Hi there,
Would it be possible to code center console buttons to do a different function?!
What I'd like to do is to covert the "hill decent control button" (the one next to ESC control) to "sport exhaust" and to convert "lock" button (the one next to hazard) into "hill descent control". If this is doable, then I will swap out physical buttons with appropriate icons.
P.S. my 2013 GTS has all the hradware needed for sport exhaust and it activates it in sport mode, but I'd like to be able to control sport exhast independently too.
Thanks,
Sam
Would it be possible to code center console buttons to do a different function?!
What I'd like to do is to covert the "hill decent control button" (the one next to ESC control) to "sport exhaust" and to convert "lock" button (the one next to hazard) into "hill descent control". If this is doable, then I will swap out physical buttons with appropriate icons.
P.S. my 2013 GTS has all the hradware needed for sport exhaust and it activates it in sport mode, but I'd like to be able to control sport exhast independently too.
Thanks,
Sam
#1577
Hi there,
Would it be possible to code center console buttons to do a different function?!
What I'd like to do is to covert the "hill decent control button" (the one next to ESC control) to "sport exhaust" and to convert "lock" button (the one next to hazard) into "hill descent control". If this is doable, then I will swap out physical buttons with appropriate icons.
P.S. my 2013 GTS has all the hradware needed for sport exhaust and it activates it in sport mode, but I'd like to be able to control sport exhast independently too.
Thanks,
Sam
Would it be possible to code center console buttons to do a different function?!
What I'd like to do is to covert the "hill decent control button" (the one next to ESC control) to "sport exhaust" and to convert "lock" button (the one next to hazard) into "hill descent control". If this is doable, then I will swap out physical buttons with appropriate icons.
P.S. my 2013 GTS has all the hradware needed for sport exhaust and it activates it in sport mode, but I'd like to be able to control sport exhast independently too.
Thanks,
Sam
#1578
https://rennlist.com/forums/panamera...-retrofit.html
#1579
Do somebody know how i can activate the Compass in my 2016 Cayenne with Piwis 3? Compass ist original and Connected with the PCM. I can See in Gateaway that the system Recognize the Compass. I can Calibrate it. But I can't do it or can't find where I can activate the compass in Piwis.i will be very happy for help.
#1581
Hi there,
Would it be possible to code center console buttons to do a different function?!
What I'd like to do is to covert the "hill decent control button" (the one next to ESC control) to "sport exhaust" and to convert "lock" button (the one next to hazard) into "hill descent control". If this is doable, then I will swap out physical buttons with appropriate icons.
P.S. my 2013 GTS has all the hradware needed for sport exhaust and it activates it in sport mode, but I'd like to be able to control sport exhast independently too.
Thanks,
Sam
Would it be possible to code center console buttons to do a different function?!
What I'd like to do is to covert the "hill decent control button" (the one next to ESC control) to "sport exhaust" and to convert "lock" button (the one next to hazard) into "hill descent control". If this is doable, then I will swap out physical buttons with appropriate icons.
P.S. my 2013 GTS has all the hradware needed for sport exhaust and it activates it in sport mode, but I'd like to be able to control sport exhast independently too.
Thanks,
Sam
The following users liked this post:
Sam_M (12-22-2023)
#1582
I have had a sport exhaust installed on my 911 cs convertible. After they installed it i wanted the buttons to be in the original order. They said they can program it however I want but did not want to take the risk of popping the button. I have popped it up and swapped it personally. So they are capable of programming the buttons
By "they" I assume you mean porsche dealership? and the tool would be PIWIS?
I would definately wanna do that, I'm wondering if launch x431 would be able to do that or not!
#1584
tpms module adaptation/coding question
I have replaced the tpms control module on my 2016 CD. New part came from dealer and per service manual it needs to be coded for the vehicle using piwis. I have a x431 pro elite and I can not see the tpms module when I connect. Can it be programmed with the x431 model I have or any other x431 model?
Also second question: with the same tool, I can not get to the oil filling function under dme>special function. Am i doing something wrong or is this a limitation of the x431 model I have?
Thanks in advance.
Also second question: with the same tool, I can not get to the oil filling function under dme>special function. Am i doing something wrong or is this a limitation of the x431 model I have?
Thanks in advance.
#1585
Where does one get a legit Launch 431? I have heard that if you buy from Amazon, those units are gray market and not supported (is that true??)? Also, there are several models. I am looking for the best bang for my buck on the 431 models.
#1587
I appreciate your input and guidance, but I have used the search function. While I have found a good many references to the 431, I haven't found an updated link for purchasing one, which model is the best bang for the buck or the legitimacy of one (either a Launch or Foxwell) purchased via Amazon.
#1588
i just bought this a month ago - it was $30 cheaper then - this seller (no affiliation) sells these on both amazon and ebay so look for the cheapest price - unit updated perfectly and i've used it to do some minor coding already
https://www.ebay.com/itm/304831423955
https://www.ebay.com/itm/304831423955
Last edited by honerboys; 01-05-2024 at 05:48 PM.
#1589
Lots of lots of lighting settings. This one is for the cornering light. We can set at what the minimum speed required for the the cornering lights to activate, how quickly it lights up, etc. Pretty interesting. We can also code it to LED so we can put in LED without worrying about the bulb out error message.
Attachment 1345055
Attachment 1345055
#1590
Got a call, apparently car is fixed now. Dealer was able to fix both modules. The entire car was reset, so call me stupid but now I have to code things back to where they were with x431 (seatbelt, windows, tailgate beeping etc). My question is, car I code with car running to avoid battery issues?
I might ask tech to help me out and code stuff using Porsche software, but its obviously gonna be extra and I am not sure tech is going to be in shop after my 5pm pickup.
And ps....I should have taken the car to dealer in the first place, that would sure save me time and money.....but who knew.....
I might ask tech to help me out and code stuff using Porsche software, but its obviously gonna be extra and I am not sure tech is going to be in shop after my 5pm pickup.
And ps....I should have taken the car to dealer in the first place, that would sure save me time and money.....but who knew.....
Would anyone with a 2015-16 Cayenne with the HID lights be able to read their default settings with a Launch?
In Headlight Central area, if you backup the code and then read the backup code in section Codiertabelle you should have these entries:
Byte 0-Rechtsverkehr .................................Right Hand Traffic
Byte 0-Country Version ..............................SAE
Byte 0-Group index .....................................PORSCHE
Byte 1-Model line ........................................Cayenne
Byte 2-Wheelbase .......................................?? (Normal Basic Wheelbase??)
Byte 2-Sensor values ...................................??
Byte 2-Steel-spring frequency ......................??
Byte 2-Steel spring type ................................??
Byte 2-Steel spring quantity ...........................?? (2 Axles??)
Byte 2-Chassis variant................................... ?? (Steel Springs??)
Byte 3-Light distribution .................................??
Byte 3-Vertical light/dark boundary................. ??
Byte 3-adaptive headlight range ....................??
Byte 3-Installed actuators ..............................?? (AFS with Variable Light Distribution??)
Byte 4-Intersection light ................................??
Byte 4-Light function ........................................??
Byte 4-Light Distribution, highway lighting ..........??
Byte 4-Light Distribution, city light .......................??
Byte 4-Turn_signal_light .......................................??
Byte 4-Headl. beam adjustm. ................................??
Byte 5-Turn_signal_light ........................................??
Byte 5-Fog light support .........................................??
Byte 5-Poor-weather lighting ..................................??
Byte 6-HBA raising during hard braking ..................??
Byte 6-Rear-axle steering ........................................?? (Inactive??)
Byte 6-Daymode .........................................................??
Byte 6-Sport ....................................................................?? (Enabled??)
Byte 1-CAN Matrix variant......................................................... ??
Byte 4-Vertical light/dark boundary................................................... ??
Byte 5-Static cornering light parallel with high beam................................ ??
Byte 5-Static cornering light switched on along with dipped beam ................??
Byte 5-Static cornering light ......................................................................?? (Via LEIMO)
Byte 6-Eco mode.................................................................... ............... ??
It is a 2015 Cayenne Diesel with HID lights, (I have cornering lights activated by turning the wheel, but no forward camera for auto high beam). Steel springs, no Air suspension. The lights look like this...
Should look like this...
Thank you in advance to anyone that can help.