When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have those same skirts in the garage. I had mine CF wrapped. Seeing them on your car makes me want to get off my other projects and get them installed - maybe before Petit le Mans at RA, but that means I have to wash the car first (think it has been months).
The widebody is clips and screwed on, unfortunately narrow body is double sided tape and some high grade silicone for the seem.
I have narrow body so it's like a 10 min install. Maybe 20 with a isopropanol cleaning for good adhesion.
You can spare 20 min.. I want to see them CF ones installed.
OK here's a goofy one: This weekend I added gloss black trim to my headlights. A purely cosmetic mod for sure, but for the time being I think I’ll keep it. If I get sick of it, it will take about 10 seconds to remove. The pre-cut vinyl rings are available here: https://kistudios.com/product/porsch...eadlight-trim/ Installation is easy but fussy. I got one side done quickly, but the other took me three tries and 30 minutes to get right. Care and attention are needed to avoid wrinkles near the outer edges (which would look terrible if allowed to dry). Once done correctly, the dry/cured result looks close enough to paint that a casual observer would think it was stock. These are terrible pics of the before & after. I’ll get some better ones eventually. Thoughts from the peanut gallery?
BEFORE
AFTER
Somethings not working there. 996 at first glance. The blacked out venting comes into it too. If you like it cool.
Very seldom do I see an"upgrade" that doesn't look Ricey unless its an OEM upgrade. Kinda like spray tan.
1. Console is covered in weird soft paint. 2. Excellent how too’s on Rennlist made the job easy. 3. Yes I have Numeric cables. 4. No, I don’t feel like crawling under car to fit them tonight. 5. The numeric shifter was easy to fit. 6. Going for test drive tomorrow!
I live in North County San Diego. HRE Wheels is in my backyard. TAG Motorsports did all of the install work.
I previously ran lobster claws with 7mm/15mm spacers.
These are HRE Liquid Silver FF01's in perfect C4S sizing, with the optional center cap coloring, aluminum valves, 235/19 front, 305/19 rear 4S tires.
This set up fills out the wheel wells perfectly!!!
Have the same in black for 997.1TT... Looks great even at stock height but a slight lowering would make it menacing for me... but alas, my driveway eats the chin spoiler as is...
Replaced engine mounts -- thanks to Bruce In Philly and frankyluis23 and others for the detailed DIY posts. Very easy to do. Surprisingly significant improvement, especially in reducing vibration at idle and smoothing first gear takeoff.
1. Console is covered in weird soft paint. 2. Excellent how too’s on Rennlist made the job easy. 3. Yes I have Numeric cables. 4. No, I don’t feel like crawling under car to fit them tonight. 5. The numeric shifter was easy to fit. 6. Going for test drive tomorrow!
Great choice just installed both on a 997TT and 996TT
Abosolutly worth the upgrade!!