What did you do to your 996 today?
10-20-2023, 10:31 PM
#9436
Track Day
Got some upholstery work done to my seats and changed out the stock (ugly) shift **** with a 993 **** and had it done in white leather to go with the houndstooth
The following 6 users liked this post by Reni:
85eurocarrera (10-21-2023),
996-CAB (11-16-2023),
freddworks (10-21-2023),
FriscoKid (10-25-2023),
GC996 (10-20-2023),
and 1 others liked this post.
10-20-2023, 11:14 PM
#9437
Three Wheelin'
Ka-pow! Did you use the original foam or get new cushions?
10-21-2023, 07:18 AM
#9438
Rennlist Member
Got to take a beautiful drive on "the Silver Thread" in SW Colorado in my project '99 Classic Club Coupe tribute. Still need a few things to complete. Today we surgically removed the 3rd brake light panel, now just have to cut a nice, flat piect of .030
sheet metal, weld in and finish!
sheet metal, weld in and finish!
wow, where you been hiding this project. You are probably past this point but I think you can use the turbo brake light panel which doesn’t have a third brake light.
The following 2 users liked this post by Tom Loder:
imhighlander (10-28-2023),
TYPE911 (10-29-2023)
10-21-2023, 07:57 AM
#9440
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Was on a roll last night. I forgot to order new fuel injectors (blue pintile type) so project is stalled unless I try to run the “upgraded” EV-1 style white injectors- not sure how that will go with a stock DME tune.
—Aaron
—Aaron
__________________
10-21-2023, 04:06 PM
#9442
Rennlist Member
Mark 2 rear bumper conversion:
The following users liked this post:
BaconManDan (11-06-2023)
10-21-2023, 05:51 PM
#9443
Rennlist Member
I flushed and bled my brakes with motul 600
The following users liked this post:
BaconManDan (11-06-2023)
10-21-2023, 08:45 PM
#9444
Rennlist Member
Installed the missing plastic 'VIN window' in the frunk. This was something I never knew was supposed to even be there until peterp posted about replacing his last year. I kept forgetting to throw in with a dealer order until this week.
After watching a YouTube video, it only took a couple of hours to install.
After watching a YouTube video, it only took a couple of hours to install.
The following 7 users liked this post by SoCal911t:
BaconManDan (11-06-2023),
binaryaudax (10-21-2023),
Fracture (10-23-2023),
James_03C4S (10-22-2023),
peterp (10-21-2023),
and 2 others liked this post.
10-21-2023, 08:52 PM
#9445
Racer
Yes Vesuvio Metallic - L40X
The following users liked this post:
James_03C4S (10-22-2023)
10-27-2023, 11:36 AM
#9447
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
I put 80 miles on the 99' C2 Cab last night after rebuilding the motor.
Had a spun crank bearing due to a incorrectly installed scavenge pump.
The cylinders were fine so I re-rung the pistons, cleaned everything and changed out several other wear items.
Will do some more testing and change the oil.
--Aaron
Had a spun crank bearing due to a incorrectly installed scavenge pump.
The cylinders were fine so I re-rung the pistons, cleaned everything and changed out several other wear items.
Will do some more testing and change the oil.
--Aaron
The following 12 users liked this post by RennPart:
BaconManDan (11-06-2023),
binaryaudax (10-28-2023),
Einsteiger (10-27-2023),
fazm (10-28-2023),
gtxracer (11-01-2023),
and 7 others liked this post.
10-28-2023, 08:39 PM
#9448
Rennlist Member
I love your rebuilds.
The following users liked this post:
RennPart (10-28-2023)
10-28-2023, 10:09 PM
#9449
Racer
Got the winter wheels powdercoated. Waiting for ceramic coating and then will send the summer wheels in.
The following 2 users liked this post by imhighlander:
Einsteiger (10-29-2023),
RennPart (10-28-2023)
10-28-2023, 10:10 PM
#9450
Racer
The following users liked this post:
BaconManDan (11-06-2023)