What did you do to your 996 today?
#7561
Race Car
I have been converted as well, for mechanics tools - they seem to have the stuff I need and it works well. I run their version of the dremel and the right angle drill and their little tire inflator at the track, really good stuff.
The ratchet and 3/8 stubby impact sucked me in 😀
The ratchet and 3/8 stubby impact sucked me in 😀
The following users liked this post:
TheChunkNorris (07-06-2022)
#7562
Rennlist Member
@SoCal911t
I love your Rennbow towel. I looked for my engine lid light socket, and I think it is missing, all there is there is the wiring and a 'socket'. So I think I need to order yet another part. I've spent sooo much on this car since purchase in Feb. I mean, to me, a lot of money. More than 1/2 purchase price. To PCar owners and collectors, chump change I'm sure. And I'm nowhere near finished....I need to learn to pace myself.
I love your Rennbow towel. I looked for my engine lid light socket, and I think it is missing, all there is there is the wiring and a 'socket'. So I think I need to order yet another part. I've spent sooo much on this car since purchase in Feb. I mean, to me, a lot of money. More than 1/2 purchase price. To PCar owners and collectors, chump change I'm sure. And I'm nowhere near finished....I need to learn to pace myself.
Last edited by damage98MO; 07-06-2022 at 02:45 PM.
#7563
Rennlist Member
The following users liked this post:
damage98MO (07-07-2022)
#7564
Replaced both frunk struts
Put a non-smoker cap on the cigarette plug (missing when I bought the car)
Swapped the driver’s side mirror (I burned the paint when trying to remove old clear bra)
Simple but satisfying
Put a non-smoker cap on the cigarette plug (missing when I bought the car)
Swapped the driver’s side mirror (I burned the paint when trying to remove old clear bra)
Simple but satisfying
The following 2 users liked this post by Alexj1100:
damage98MO (07-10-2022),
wdb (07-09-2022)
#7565
Instructor
Took a plastic pick and some adhesive remover to those hideous air bag decals, looks brand new after a little detail.
The following 6 users liked this post by Willys 47:
AZPete (07-14-2022),
damage98MO (07-10-2022),
peterp (07-09-2022),
TexSquirrel (07-09-2022),
TheChunkNorris (07-10-2022),
and 1 others liked this post.
#7566
RL Community Team
Rennlist Member
Rennlist Member
Sometimes you do a job and then wonder feel it was worth it...but you KNOW it was worth it.
Last edited by TexSquirrel; 07-09-2022 at 05:58 PM.
The following 3 users liked this post by TexSquirrel:
#7567
Rennlist Member
Was that a swamp rat or a flood car it looks like weeds were growing???
#7568
Three Wheelin'
#7569
Intermediate
Took off the bumper to clean the radiators, was easier to take apart than expected. Radiators weren’t too bad, but satisfying before and after
Last edited by Rxgs; 07-10-2022 at 10:53 PM.
The following 2 users liked this post by Rxgs:
damage98MO (07-10-2022),
wdb (07-10-2022)
#7570
Rennlist Member
Discovered that my litronic with retrofitlabs
...Are actually really good. I went for a night drive for the first time in my 996, 1st time since the upgrade and I'm so pleased with the headlights output and aim. I had been worried that upgrading the reflectors would then require aiming the lights but turns out that step is not needed. The lights are bright 🌞🌞 🌞🌞🌞. Here's a link to the product. I chose the basic 4300k lights, they are very natural, not white or blue. https://retrofitlab.com/collections/...xenon-retrofit
Definitively well with the price. I purchased new h7 hibeams as well, from a different source.
If you do upgrade a reflector, from any seller, when you unscrew the 2 screws that have rubber spacers, count the rotations and match when installing. Don't torque the screws in or you will struggle to aim.
Definitively well with the price. I purchased new h7 hibeams as well, from a different source.
If you do upgrade a reflector, from any seller, when you unscrew the 2 screws that have rubber spacers, count the rotations and match when installing. Don't torque the screws in or you will struggle to aim.
The following users liked this post:
dporto (07-10-2022)
#7571
Racer
^I wish I had followed the number of turns advice. My aim on one is way off. I’ll just have to fiddle with it until it’s proper. The lights work great, though!!
The following users liked this post:
damage98MO (07-11-2022)
#7572
Rennlist Member
Cleaned up the seat belt buckle receptacles. Used a sample sheet of red vinyl wrap. The red plastic was faded to the pink color of Bazooka Joe bubble gum. Sanded a little and took an Exacto to trim. I used a hook nose pick to keep the piece in place. 20 minutes total. Spent 2 years thinking of a durable enough DIY solution. So there’s that.
Sample red wrap and an Exacto
Sample red wrap and an Exacto
Last edited by hatchetf15; 07-11-2022 at 10:29 PM.
The following 3 users liked this post by hatchetf15:
#7573
Rennlist Member
Cleaned up the seat belt buckle receptacles. Used a sample sheet of red vinyl wrap. The red plastic was faded to the pink color of Bazooka Joe bubble gum. Sanded a little and took an Exacto to trim. I used a hook nose pick to keep the piece in place. 20 minutes total. Spent 2 years thinking of a durable enough DIY solution. So there’s that.
Sample red wrap and an Exacto
Sample red wrap and an Exacto
The following 7 users liked this post by dpluimer:
Billup (07-13-2022),
EVOMMM (07-12-2022),
JMELZER (07-12-2022),
Manny_911 (07-12-2022),
TexSquirrel (07-12-2022),
and 2 others liked this post.
#7575
RL Community Team
Rennlist Member
Rennlist Member
Headlight looks great.
Seems like the film may have done a good job of protecting the headlight from UV damage.
Seems like the film may have done a good job of protecting the headlight from UV damage.
The following users liked this post:
Manny_911 (07-12-2022)