When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Could have used the wagon but it was fun to put all our equipment in the car. Meant we could get in some fun seat time on the Blue Ridge Parkway before disappearing into the woods for the weekend and do the same on Sunday morning. Best part was a backpacking foursome telling us that we had inadvertently parked in an overnight lot and the scenic overlook down the road a little bit.
Found why my brake light fuse burnt: The 3rd brake light wire below the convertible top flap was cooked by the California weather.
I had to replace the wire up to the connector.
Found why my brake light fuse burnt: The 3rd brake light wire below the convertible top flap was cooked by the California weather.
I had to replace the wire up to the connector.
Who would have the light California weather is harder on cars than Chicago weather.
Found why my brake light fuse burnt: The 3rd brake light wire below the convertible top flap was cooked by the California weather.
I had to replace the wire up to the connector.
that looks more like high resistance heat damage. I would keep an eye on that wire or replace the third break light.
Replaced the completely dead battery. Also have new engine and gear oil along with an orange Function First trans mount going in now. I’m hoping to put some miles on it with the new trans mount before I stash it for the winter.
Replaced the completely dead battery. Also have new engine and gear oil along with an orange Function First trans mount going in now. I’m hoping to put some miles on it with the new trans mount before I stash it for the winter.
Good stuff. I have an oil change coming in Dec using the same oil. I was previously running Mobil 1 0-40 for the last 3 years
Last edited by Mike Murphy; 11-13-2020 at 03:29 PM.
Clutch and pressure plate job the last two days. Pain in the *** trying this alone with jacks and stands on the floor...Got a good 15hrs into this project! Next time I'll drop the motor with the trans to save time.