What did you do to your 996 today?
The following users liked this post:
Ratchet1025 (01-06-2020)
#2373
#2375
Just a car guy
Rennlist Member
Rennlist Member
Joined: Jan 2002
Posts: 9,927
Likes: 836
From: South Lyon, Michigan, Ewe Ess Eh
What do you need?
How about Rein engine mounts and thermostat, Pierburg waterpump, Mahle oil and fuel filters, Hastings air filter, Contitech drive belt kit, Delphi coils, Bosch spark plugs and a Remy re-man alternator?
How about Rein engine mounts and thermostat, Pierburg waterpump, Mahle oil and fuel filters, Hastings air filter, Contitech drive belt kit, Delphi coils, Bosch spark plugs and a Remy re-man alternator?
The following users liked this post:
808Bill (01-06-2020)
#2377
Just a car guy
Rennlist Member
Rennlist Member
Joined: Jan 2002
Posts: 9,927
Likes: 836
From: South Lyon, Michigan, Ewe Ess Eh
If there's a lesson here: Get the PET (at the Porsche website) and find the part number you need and then do a google search on that number. Lots of options out there.
#2378
This was Saturday actually, but close enough. We had a local PCA outing to K&M Collision in Hickory, NC, one of the few Porsche certified collision repair facilities in the state. About 85 miles away and well worth the trip. The place is cleaner than my living room and workmanship is absolutely impeccable.
Anyway, weather was bad for the trip but I had the irresistible urge to drive my car. On the way, I discovered my odo was about to display all sixes. Hope that’s not a bad sign. Anyway, I quickly whipped out my phone and Captured the moment..
Also, I was thrilled when @carlvs took some cool pics of my car in the fog. This one’s my favorite. Thanks buddy!
Ofcourse, a few cool cars in the shop I can only dream about owning.
GT3 RS with mostly underbody damage
GT4 with only a few thousand miles on it with structural damage around the door frame. Purchased at a salvage auction.
Anyway, weather was bad for the trip but I had the irresistible urge to drive my car. On the way, I discovered my odo was about to display all sixes. Hope that’s not a bad sign. Anyway, I quickly whipped out my phone and Captured the moment..
Also, I was thrilled when @carlvs took some cool pics of my car in the fog. This one’s my favorite. Thanks buddy!
Ofcourse, a few cool cars in the shop I can only dream about owning.
GT3 RS with mostly underbody damage
GT4 with only a few thousand miles on it with structural damage around the door frame. Purchased at a salvage auction.
The following users liked this post:
cds72911 (01-07-2020)
#2379
RockAuto was the cheapest for Bosch factory O2 sensors. (I replaced all 4 when I installed my Fabspeed x-pipe)
Also they were the cheapest for Bosch MAF Sensor.
I also got my engine mounts from RockAuto.
If you need new Bosch fuel injectors go to Warehouse33.
I buy lots from RockAuto, but mostly for client cars.
Also they were the cheapest for Bosch MAF Sensor.
I also got my engine mounts from RockAuto.
If you need new Bosch fuel injectors go to Warehouse33.
I buy lots from RockAuto, but mostly for client cars.
The following 4 users liked this post by zbomb:
#2383
Replaced bad pressure sending unit. Between reading here and on renntech that was a super easy job. Used a crows foot wrench with a universal and a long extension. Fortunately, I have small forearms, so it was super easy to unplug the wires from the top.
Replaced the gear oil in the 6MT. I'm thinking it might have never been changed...
Replaced the gear oil in the 6MT. I'm thinking it might have never been changed...
The following 6 users liked this post by TexSquirrel:
Coopduc (01-09-2020),
Ratchet1025 (01-09-2020),
RSBro (01-20-2020),
SoundnSpeed (01-09-2020),
strathconaman (01-19-2020),
and 1 others liked this post.