Has anyone done a CarPlay retrofit / Headunit replacement for 991.1
#2551
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The Amazon link is posted here in the last couple of months, so if you search back you should find it
The following users liked this post:
q8linux (04-29-2024)
#2553
#2554
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
i am living in kuwait, if i choose fast shipping (dhl) it will cost me additional $80 lol
so amazon better for me..
before i buy, are these the cables i need?
https://www.amazon.com/gp/product/B0...N6D128EB&psc=1
https://www.amazon.com/gp/product/B0...OFTAZ9BA&psc=1
so amazon better for me..
before i buy, are these the cables i need?
https://www.amazon.com/gp/product/B0...N6D128EB&psc=1
https://www.amazon.com/gp/product/B0...OFTAZ9BA&psc=1
FAKRA D > SMA is more difficult to find BUT my understanding is that the FAKRA Z connector fits any female FAKRA socket, as it's "unkeyed" (no tabs on the outside).
See:
#2555
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The FAKRA C > SMA is correct. The other isn't.
FAKRA D > SMA is more difficult to find BUT my understanding is that the FAKRA Z connector fits any female FAKRA socket, as it's "unkeyed" (no tabs on the outside).
See: https://www.amazon.com/POBADY-Fakra-.../dp/B0CDGSN9D1
FAKRA D > SMA is more difficult to find BUT my understanding is that the FAKRA Z connector fits any female FAKRA socket, as it's "unkeyed" (no tabs on the outside).
See: https://www.amazon.com/POBADY-Fakra-.../dp/B0CDGSN9D1
i found this fakra D
is that one?
#2556
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
i see thanks
i found this fakra D
https://www.amazon.com/gp/product/B0...K3CTG0MG&psc=1
is that one?
i found this fakra D
https://www.amazon.com/gp/product/B0...K3CTG0MG&psc=1
is that one?
The following users liked this post:
q8linux (04-29-2024)
#2558
#2559
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
RAM is crucial and IMO takes precedence over CPU if two COUs have similar performance. 8 gig of RAM is, again IMO, essential for smooth, easy performance, especially if running multiple apps simultaneously. Android can be a bit of a memory hog so it always pays to have as much as you can get. I think this is also one of the reasons why the developers of these units stick to Android 10, 11 or 12. Note that many of the latest phones running Android 14 are now offering 16 gigs of RAM.
The following users liked this post:
dvon (04-29-2024)
#2560
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thank for sharing ,
I spoke to them also and did not see this post, so did not ask about the discount. I did ask about the Back uo cam add, and they mentioned they would include. Curious to see which cam they offer. Think I have seen them for $1.99 online?
but sure you get what you pay for.
SoI I just need to figure out model and memory? and a good camera if I want to add.
The wireless tailight cam an option?
I spoke to them also and did not see this post, so did not ask about the discount. I did ask about the Back uo cam add, and they mentioned they would include. Curious to see which cam they offer. Think I have seen them for $1.99 online?
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
SoI I just need to figure out model and memory? and a good camera if I want to add.
The wireless tailight cam an option?
The following users liked this post:
RwdConnor (04-29-2024)
#2562
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
This is a great thread. Wish I saw it before frying my PCM 3.1 trying to add the ISUDAR board. I had a bad connection of flex cable and saw my PCM PCB board create a small black puff of smoke and dead. I highly encourage others to leave their stock unit alone and go this route if you want carplay. Original PCMs are available from Germany, cost $3500 and up and must be programmed. I hope this is the low cost upgrade before dropping $1000s on OEM PCM which kinda sucks anyway.
So what I gather from the thread is 8.4in screen, 8G RAM min, 7862 processor and optical box. Wait to buy until May 1 when AliExpress goes on sale.
So what I gather from the thread is 8.4in screen, 8G RAM min, 7862 processor and optical box. Wait to buy until May 1 when AliExpress goes on sale.
Last edited by tj90; 04-29-2024 at 05:45 PM.
The following users liked this post:
H1975nl (05-10-2024)
#2563
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have a Cayenne with Bose so I need the optical box. I dont see this seller offering one. Maybe its somewhere in their store but cannot find it? I see CHSTEK offers one.
Last edited by tj90; 04-29-2024 at 05:48 PM.
The following users liked this post:
dvon (04-29-2024)
#2564
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
https://www.aliexpress.com/item/33052809088.html
#2565
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
This is a great thread. Wish I saw it before frying my PCM 3.1 trying to add the ISUDAR board. I had a bad connection of flex cable and saw my PCM PCB board create a small black puff of smoke and dead. I highly encourage others to leave their stock unit alone and go this route if you want carplay. Original PCMs are available from Germany, cost $3500 and up and must be programmed. I hope this is the low cost upgrade before dropping $1000s on OEM PCM which kinda sucks anyway.
So what I gather from the thread is 8.4in screen, 8G RAM min, 7862 processor and optical box. Wait to buy until May 1 when AliExpress goes on sale.
So what I gather from the thread is 8.4in screen, 8G RAM min, 7862 processor and optical box. Wait to buy until May 1 when AliExpress goes on sale.
p.s. don't forget the two extra FAKRA Male > SMA Male adapters (FAKRA types C and D, per this thread)
Last edited by ratt359; 04-29-2024 at 07:16 PM. Reason: Extra bits!