PIWIS 3 Coding Retrofit and Feature Request
#1006
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have never noticed the storage lock code. If anyone has an answer regarding what that code does and why it is off, I would appreciate it.
#1007
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I can't one touch close or open bc it's a spider, but it can be coded to the regular top boxster and the 911 (the latter requires an euro style fob). On the spider, the closing or opening procedure can be started via fob post coding with the windows either going up or down. It's in one of the posts mid thread if think, little over a year ago,
#1008
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
There is no harm in setting the code to close windows when closing top with one-touch. However, I did not notice it changing anything.
I have never noticed the storage lock code. If anyone has an answer regarding what that code does and why it is off, I would appreciate it.
I have never noticed the storage lock code. If anyone has an answer regarding what that code does and why it is off, I would appreciate it.
https://rennlist.com/forums/718-gts-...l#post19173635
(2nd highlighted "ja" I thought would enable windows to close)
#1009
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Ok - are you saying it is NOT possible with the Spyder to have the windows close after closing the top with the fob? I've already coded to open and close the top with the fob, but when closing the top the windows stay open... then I have to unlock the car, put the key in the ignition and close the windows with the door buttons... it would be really nice if the windows would close when using the fob. I was actually going to go in and have them try and enable this next week but will skip it if it's not possible. Here's the post where I thought the instructions were to have windows:
https://rennlist.com/forums/718-gts-...l#post19173635
(2nd highlighted "ja" I thought would enable windows to close)
https://rennlist.com/forums/718-gts-...l#post19173635
(2nd highlighted "ja" I thought would enable windows to close)
When you say your windows stay open are they completely down or just down one or two inches?
#1010
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
No. I am not saying that. If you change the code for closing the windows after opening the top with the key fob to yes the windows will close. I was saying that the code to close the windows after closing the top with one touch does not do anything because I haven't figured out how to close the top with one touch.
When you say your windows stay open are they completely down or just down one or two inches?
When you say your windows stay open are they completely down or just down one or two inches?
The following users liked this post:
Ken718B (04-26-2024)
#1011
The following users liked this post:
Larry Cable (04-26-2024)
#1012
Rennlist Member
The following users liked this post:
MrFunk (04-26-2024)
#1013
Rennlist Member
Thread Starter
The following 3 users liked this post by 718socal:
#1014
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
No. I am not saying that. If you change the code for closing the windows after opening the top with the key fob to yes the windows will close. I was saying that the code to close the windows after closing the top with one touch does not do anything because I haven't figured out how to close the top with one touch.
When you say your windows stay open are they completely down or just down one or two inches?
When you say your windows stay open are they completely down or just down one or two inches?
The following users liked this post:
Larry Cable (04-26-2024)
The following 2 users liked this post by Z06jerry:
718socal (04-26-2024),
Larry Cable (04-26-2024)
#1016
Rennlist Member
#1017
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
#1018
Rennlist Member
#1019
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Well I have answered this a few times here and a few dozens PM's to the OP. He would need to research this on his own. When I started coding with PIWIS, I was told by @rnlst_log to understand the logic of the Porsche engineer and not our logic. Coming from the BMW GT1 or Esys coding, it is definitely different.
The following 2 users liked this post by 718socal:
downshifted (06-30-2024),
Larry Cable (04-26-2024)
#1020
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Well I have answered this a few times here and a few dozens PM's to the OP. He would need to research this on his own. When I started coding with PIWIS, I was told by @rnlst_log to understand the logic of the Porsche engineer and not our logic. Coming from the BMW GT1 or Esys coding, it is definitely different.
![jumper](https://rennlist.com/forums/graemlins/jumper.gif)
many, many thanks for all your hard work here!
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
The following users liked this post:
MrFunk (04-26-2024)