Kline 718 GT4/Spyder exhaust
#2011
A lil something came in the mail today!
The following 6 users liked this post by MrFunk:
6IXSPD (12-27-2023),
Growler48 (12-28-2023),
LooseNut (12-27-2023),
SupremePower (12-27-2023),
tigerhonaker (12-28-2023),
and 1 others liked this post.
#2012
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
__________________
SupremePOWER Inc
1562 Kimberly Ave - Fullerton CA 92831
Contact: sales@supremepower.com - Shop# (714)632-1951
World's Largest Retailer/Distributor of BBS Motorsport & Street Wheels from 2015-2023
Huge Inventory: BBS, Kline, Brembo, Soul, Recaro, KW, Akrapovic & 200+ brands. Installation available
** Retail & Wholesale ** Global Delivery ** We match/beat any authorized dealer's price **
SupremePower.com // SupremeForged.com // Follow SupremePower on IG
SupremePOWER Inc
1562 Kimberly Ave - Fullerton CA 92831
Contact: sales@supremepower.com - Shop# (714)632-1951
World's Largest Retailer/Distributor of BBS Motorsport & Street Wheels from 2015-2023
Huge Inventory: BBS, Kline, Brembo, Soul, Recaro, KW, Akrapovic & 200+ brands. Installation available
** Retail & Wholesale ** Global Delivery ** We match/beat any authorized dealer's price **
SupremePower.com // SupremeForged.com // Follow SupremePower on IG
#2013
Rennlist Member
Awesome. I almost want to buy it again just to enjoy the polished metal LOL. Did you go with stainless or inconel Mr. Frunk
#2014
I went with Inconel. I plan on keeping this car a very very long time - so figured might as well!
The following users liked this post:
UncleDude (12-27-2023)
#2015
A few more
It really is a work of art!
It really is a work of art!
The following 2 users liked this post by MrFunk:
BoxKing (12-27-2023),
SupremePower (12-29-2023)
#2017
Installed.
Few comments.
Install was quite straight forward. Fitment was spot on.
If you opt for the heat shielding, you won't get a socket on the 12mm nuts on the headers side. Its all hand wrenching...
Use some WD40 to get the tips to slide on. They were tight.
Few comments.
Install was quite straight forward. Fitment was spot on.
If you opt for the heat shielding, you won't get a socket on the 12mm nuts on the headers side. Its all hand wrenching...
Use some WD40 to get the tips to slide on. They were tight.
The following 9 users liked this post by MrFunk:
6IXSPD (12-28-2023),
crazyrob (01-02-2024),
fasteddie99 (12-29-2023),
LooseNut (12-29-2023),
PAJ (12-30-2023),
and 4 others liked this post.
#2019
The tips look proper if you ask me!
The following 6 users liked this post by MrFunk:
BoxKing (12-29-2023),
JKen_0115 (12-29-2023),
Reno 911 (12-29-2023),
SupremePower (12-29-2023),
TRSCobra (12-29-2023),
and 1 others liked this post.
#2021
These are the RS tips from KLINE.
I'm not sure of size.
Eric prob knows... or it's referenced above in this thread.
I'm not sure of size.
Eric prob knows... or it's referenced above in this thread.
#2022
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
#2023
I got the car out for a quick drive while weather was nice today. Prob 45 min seat time with the new exhaust. There isn't a ton more I can say that hasn't already been said... the sound is excellent and provides the appropriate emotional soundtrack to complement the other aspects of the vehicle... all reviews prior to mine are accurate. One thing I'll mention is that it's a very refined exhaust. Quiet when you want it, but loud when you want it with a nice tone to it... like a finely tuned trumpet/instrument. As you'd expect from a car like this. I also noticed that there was significantly less heat coming from the rear wheel well after the drive. I didn't notice any immediate performance improvements, not that I was expecting much... there was a lot of traffic though and it's been about 6 weeks since I last drove the car so hard to compare.
All in all the exhaust is as it should have come from factory which is a huge complement to Kline. I didn't notice any drone vs stock (i didn't really think the stock system had drone though). I've got the valves collars at 50%. Did not hear any transition between closed and open at that setting. With the exhaust button pressed the only different i noticed was the piped in intake sound was louder still. I'll keep the collars in this position.
I also think the RS tips look damn good!!
I can't wait to really get it out in the spring with the top down!
All in all the exhaust is as it should have come from factory which is a huge complement to Kline. I didn't notice any drone vs stock (i didn't really think the stock system had drone though). I've got the valves collars at 50%. Did not hear any transition between closed and open at that setting. With the exhaust button pressed the only different i noticed was the piped in intake sound was louder still. I'll keep the collars in this position.
I also think the RS tips look damn good!!
I can't wait to really get it out in the spring with the top down!
The following users liked this post:
LooseNut (12-29-2023)