Isudar Carplay for PCM 3.1
#1037
Could be the ribbons that connect to the vertical front panel...maybe got pulled.during install.
Did you remove the Front panel as part of your process ? I try not so.......
Check/re do those. Pretty sure you only have a ribbon connection problem here...... also, make sure the Quad lock is in correctly...all the way.
Did you remove the Front panel as part of your process ? I try not so.......
Check/re do those. Pretty sure you only have a ribbon connection problem here...... also, make sure the Quad lock is in correctly...all the way.
#1038
I did not remove the front panel, so I will try and do that now and check those ribbons. I did check the quad lock a number of times to make sure it was seated correctly. It was working great for a hour or so, freeway miles so nothing bumpy, just all of a sudden went blank screen.
#1040
At this point I am just hoping to get my PCM back, I have un-installed the Isudar board and components. The ribbon looks correctly seated in the front and main panel. Not sure what else to check.
The following users liked this post:
David perkar (10-17-2022)
#1049
This is a video I took of the lights on the PCM going on when I start the car. The PCM seems to reboot when i hold the INFO key for 30 seconds or so.
Last edited by ralpheickhof; 09-11-2022 at 07:41 PM. Reason: I made the video smaller and uploaded it.