Orthojoe's GT4 track thread and ramblings
#451
#452
Racer
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Had the front wheels re-balanced with the weights on the inner barrel and mounted all 4 wheels today.
![](http://s6.postimg.org/hubrc320x/IMG_7686_1.jpg)
***NOTE on OZ 19" FRONT wheels. Very little clearance from the caliper if you place the wheel weights on the outer edge of the barrel.
HOWEVER, if you place the weights on the inner edge of the barrel, once you load the car and start driving, you will hear a clicking sound. That is because the brake duct is hitting the wheel weights.
***You will need to trim the front brake ducts in order to make these wheels work. Not a big deal, but be aware
![](http://s6.postimg.org/ixvvo1mo1/IMG_7692_1.jpg)
Ready for next weekend.
![](http://s6.postimg.org/xv4cp1zwh/IMG_7688_1.jpg)
![](http://s6.postimg.org/hubrc320x/IMG_7686_1.jpg)
***NOTE on OZ 19" FRONT wheels. Very little clearance from the caliper if you place the wheel weights on the outer edge of the barrel.
HOWEVER, if you place the weights on the inner edge of the barrel, once you load the car and start driving, you will hear a clicking sound. That is because the brake duct is hitting the wheel weights.
***You will need to trim the front brake ducts in order to make these wheels work. Not a big deal, but be aware
![](http://s6.postimg.org/ixvvo1mo1/IMG_7692_1.jpg)
Ready for next weekend.
![](http://s6.postimg.org/xv4cp1zwh/IMG_7688_1.jpg)
I am looking for some Foster Parents. I was hoping you would consider adopting me. I keep my room clean, do my dishes, and do not make much noise. I can keep you seeing clearly so you drive faster and pick better lines. I am also willing to double as a garage assistant. If interested let me know!
Jim
P.S. I can also contribute to the garage stable!
#453
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
it often leads to weights on both edge of inside barrel and at 19" it's likely the wheel wt gets knocked off by the caliper if a piece of rubber off yoru tire gets wedged in there.
#454
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Drjimh
Joe,
I am looking for some Foster Parents. I was hoping you would consider adopting me. I keep my room clean, do my dishes, and do not make much noise. I can keep you seeing clearly so you drive faster and pick better lines. I am also willing to double as a garage assistant. If interested let me know!
Jim
P.S. I can also contribute to the garage stable!
I am looking for some Foster Parents. I was hoping you would consider adopting me. I keep my room clean, do my dishes, and do not make much noise. I can keep you seeing clearly so you drive faster and pick better lines. I am also willing to double as a garage assistant. If interested let me know!
Jim
P.S. I can also contribute to the garage stable!
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
#455
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hoosiers ..... This weekend at WGI I saw a gentleman from Canada who was running a yellow GT4 with Hoosiers on 19" in bigger sizes than I thought possible. No rubbing. He was running 265 on front and 325 on rear. He supposedly is on RL. Hopefully he chimes in with what wheels he was running and other info as I forgot to ask. He was very fast...
#456
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
325 in the rear?
are you certain?
i am 265/295 hoosier on GT4
295 goes on 10.5 or 11" wheels so 325 would need 11.5 to 12" wheel. 11.5 wheels will not fit.
are you certain?
i am 265/295 hoosier on GT4
295 goes on 10.5 or 11" wheels so 325 would need 11.5 to 12" wheel. 11.5 wheels will not fit.
#457
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
325 is about 2" wider than 295. That would be sweet if they could fit.
#459
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
That's crazy wide. Just add a 4.0L rebuild and you're near GT4 RS material
![Stick Out Tongue](https://rennlist.com/forums/images/smilies/tongue.gif)
#461
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Driver was doing 2:10 in his first outing in car. He knew track well and is a red group driver.
I am white group and first time at the glen on stock settings with cup2 tires doing 2:23
Last day and a half was not dry but not sure I could have improved beyond a 2:20 in better weather
( rain and track wetness were great for improving skill and smoothness though)
I am white group and first time at the glen on stock settings with cup2 tires doing 2:23
Last day and a half was not dry but not sure I could have improved beyond a 2:20 in better weather
( rain and track wetness were great for improving skill and smoothness though)
#462
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Driver was doing 2:10 in his first outing in car. He knew track well and is a red group driver.
I am white group and first time at the glen on stock settings with cup2 tires doing 2:23
Last day and a half was not dry but not sure I could have improved beyond a 2:20 in better weather
( rain and track wetness were great for improving skill and smoothness though)
I am white group and first time at the glen on stock settings with cup2 tires doing 2:23
Last day and a half was not dry but not sure I could have improved beyond a 2:20 in better weather
( rain and track wetness were great for improving skill and smoothness though)
#463
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Lol... No clubsport
driver name is Lacouture, Eric from Canada in case someone knows him and can ask him to chime in with details
I think he might have been running forgeline 19 wheels but am not sure about the brand
driver name is Lacouture, Eric from Canada in case someone knows him and can ask him to chime in with details
I think he might have been running forgeline 19 wheels but am not sure about the brand