GT4 - Unlocking the Power Potential!
#541
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#542
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It has been a while since we last heard from John at BGB. They updated their website a couple of weeks ago to add information on their Stage I, II and III, upgrades for the GT4. There was a small glitch and the Stage III upgrade showed the same information as the Stage II upgrade. John just fixed that. Now you can see what each stage costs, what's included, and what the resulting increases in HP and torque will be. http://www.teambgb.com/981-CAYMAN-GT...KITS-s/130.htm
#543
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
^ I looked at Stage 1 and the pricing does nor make sense at $10,000. You figure the sport headers are $3000, the Plenum and throttles body $1350, Filters are $250, and tune should be around $1000-$1300. What am I missing??
#544
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The tune is 4K+ from the German tuner. 1.2 from cobb.
#547
Three Wheelin'
#548
Racer
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Dyno tuning probably costs a little more than $1300
Labor for the rest to make it 10k total?
Sounds about right to me.
#549
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Ah, I was not paying attention - I was thinking of the original stage I. Labor is a big piece. It was about 15 hours for the Plenum/TB and headers on my car, which I think is on the high side.
#550
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The way I read the offerings, each price is cumulative (i.e. Stage II is just for the X51 parts, LSD, LWFW, clutch). If you want the full-boat, total cost is $47,300.
#552
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I don't think that's the case since DeMan, who I believe worked with BGB on the stroker kit, is charging $18,950 for the 4.0 conversion.
#554
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Looking at DeMan's site, I may have answered my own question.
4.0L Engine Package
Complete and Dyno Tested it includes:
403HP and 340FT/Lb of TQ at the wheels!
4.0L Stroker kit
82mm Throttle Body
Headers
Mufflers if desired
In-house Custom Dyno Tuning
and more…
Again, I post this because I thought there was collaboration on the stroker kit between BGB and DeMan. If this runs afoul of the thread, please delete.
4.0L Engine Package
Complete and Dyno Tested it includes:
403HP and 340FT/Lb of TQ at the wheels!
4.0L Stroker kit
82mm Throttle Body
Headers
Mufflers if desired
In-house Custom Dyno Tuning
and more…
Again, I post this because I thought there was collaboration on the stroker kit between BGB and DeMan. If this runs afoul of the thread, please delete.
Last edited by aco; 03-27-2016 at 07:10 PM. Reason: explanation
#555
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Looking at DeMan's site, I may have answered my own question.
4.0L Engine Package
Complete and Dyno Tested it includes:
403HP and 340FT/Lb of TQ at the wheels!
4.0L Stroker kit
82mm Throttle Body
Headers
Mufflers if desired
In-house Custom Dyno Tuning
and more…
Again, I post this because I thought there was collaboration on the stroker kit between BGB and DeMan. If this runs afoul of the thread, please delete.
4.0L Engine Package
Complete and Dyno Tested it includes:
403HP and 340FT/Lb of TQ at the wheels!
4.0L Stroker kit
82mm Throttle Body
Headers
Mufflers if desired
In-house Custom Dyno Tuning
and more…
Again, I post this because I thought there was collaboration on the stroker kit between BGB and DeMan. If this runs afoul of the thread, please delete.