Dynavin head unit
10-08-2014, 03:13 PM
#272
5th Gear
Join Date: Oct 2014
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Hi! I just got the cayenne 2007 (07-10') model and did the dynavin n6 swap this afternoon. Now i have encounterd some issues. The pdc and obc are both not working. For the obc everything just stays at "0". Now cnb88 says Dynavin says its not supported for the cayenne, however since i read the whole thread i saw people post pictures that atleast their obc is working, not sure if anyone got the pdc working. Is it definetly sure that the pdc and obc aren't supported for the porsche cayenne?
Last edited by robbb; 10-08-2014 at 05:02 PM.
10-08-2014, 05:04 PM
#273
Track Day
Join Date: Sep 2014
Location: Roskilde, Denmark
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
I just got the cayenne 2007 (07-10') model and did the dynavin n6 swap this afternoon. Now i have encounterd some issues. The pdc and obc are both not working. For the obc everything just stays at "0". Now cnb88 says Dynavin says its not supported for the cayenne, however since i read the whole thread i saw people post pictures that atleast their obc is working, not sure if anyone got the pdc working. Is it definetly sure that the pdc and obc aren't supported for the porsche cayenne?
Regarding the missing obc and pdc, this has been confirmed by Dynavin (I wrote them directly). According to Dynavin, the information for PDC and obc is not communicated via CANBUS thus not available for the Dynavin unit. If you are able to find a solution, I would very much appreciate it (please post it in this thread).
Best regards,
cnb88
10-08-2014, 06:04 PM
#274
5th Gear
Join Date: Oct 2014
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Hi, okay well thats too bad that it wont work. if they said that information in not being sent to the canbus then a future software update wont do the trick either 
. However im not sure if this is the case for you guys but my canbus has two connector inputs, at the moment im only using one. Maybe i should try plugging it in to the other side of the canbus see if that makes a difference. Tomorrow ill pull out the head unit again.
. However im not sure if this is the case for you guys but my canbus has two connector inputs, at the moment im only using one. Maybe i should try plugging it in to the other side of the canbus see if that makes a difference. Tomorrow ill pull out the head unit again.
10-08-2014, 06:15 PM
#275
Track Day
Join Date: Sep 2014
Location: Roskilde, Denmark
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Hi, okay well thats too bad that it wont work. if they said that information in not being sent to the canbus then a future software update wont do the trick either . However im not sure if this is the case for you guys but my canbus has two connector inputs, at the moment im only using one. Maybe i should try plugging it in to the other side of the canbus see if that makes a difference. Tomorrow ill pull out the head unit again.
. However im not sure if this is the case for you guys but my canbus has two connector inputs, at the moment im only using one. Maybe i should try plugging it in to the other side of the canbus see if that makes a difference. Tomorrow ill pull out the head unit again.best regards
cnb88
10-09-2014, 10:38 AM
#277
5th Gear
Join Date: Oct 2014
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I tried and you were right. Different input.. my wiring harness from the dynavin doesnt utilize all the wires coming from the car. Does anyone have a schematic of the wiring harness that comes from the car?
10-09-2014, 11:19 AM
#278
Nordschleife Master
Join Date: Dec 2004
Location: Guelph, Ontario, Canada
Posts: 6,164
Likes: 0
Received 5 Likes
on
5 Posts
There are three bus systems in the Cayenne. The CANBUS which communicates to the major drive-train systems, the infotainment bus ( I believe that is the fiber optic bus) which connects the radio to the sub systems and the COMFORTBUS which connects things like the heated seats and such to the main systems. At least from all my research that's what I have discovered.
10-10-2014, 09:46 PM
#280
Intermediate
Join Date: Mar 2012
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
10-14-2014, 11:03 PM
#283
Advanced
Join Date: Dec 2010
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
10-15-2014, 12:19 AM
#284
Advanced
Join Date: Apr 2014
Location: Southern California
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
What I don't like is that they all have raised their prices. It use to be $799.
I stand corrected on my claim of price going up. The price is bit higher only because the manufacturer has increased their price. The Dynavin store price is $1049 but JT Distributing still discounts it quite a bit. I would not buy from anyone other than JT as they stand behind their sales.
I stand corrected on my claim of price going up. The price is bit higher only because the manufacturer has increased their price. The Dynavin store price is $1049 but JT Distributing still discounts it quite a bit. I would not buy from anyone other than JT as they stand behind their sales.
Last edited by Nimesh Udani; 10-15-2014 at 08:36 PM. Reason: Originally I had not researched the info. throughly.
10-15-2014, 01:14 AM
#285
Rennlist Member
Regarding the Ottonavi place, they claim 49 in stock but say shipping in 1-2 weeks which means they really don't have any in stock.