When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I bought a freshly revised mezger engine, 4.0 Liter, crankshaft from 997 Gt3 RS 4.0, carillo rods, mahle pistons made by Schmirler. Should bring some fun.
Just working on my flat floor to link up with the edge of my Joe Toth splitter and out to the edges of the skirts... going to build up further back and custom diffuser as well. The blurred out spot was my phone number.. dont want anymore crazies on here calling me
Interesting. What parts do you use for the underbody panels except for the Joe toth splitter?
997 TT parts? Numbers? Thx in Advance.
Farthest forward piece is an APR reinforced carbon and kevlar splitter from another car, I think GTR, that I am grinding down and shaping to fit the curve/dimensions of the toth splitter
Next piece back is from 997 GT3/GT2.. i think it is the same on 2wd 997 cars also, and maybe Cayman and Boxster. I used the one from 2wd models because it does not have the ducts to send air to the front diff. I dont have front diff so better to keep it flat and smooth.
99750452701 turbo/AWD piece with ducts for front diff
99750452702 GT car/2WD 997 piece
The 3 center sections are also from 997 GT3 but I think is the same across all 997 cars
99750404300- center
99750404303- left
99750404403- right
The next section back I haven't acquired yet, but it is different.. Need to use either GT car or Turbo one.. turbo one has 2 vents to direct air to the transmission, GT car one is flat with no trans cooling ducts since there is a transmission cooler on GT cars.
99750462992- GT car section
99750402900- turbo awd section with ducts for air to trans
The final piece to the rear, also not pictured, is same across all 997.1 turbo and carreras, and all 997.1-.2 GT cars.
99750442901
This will get the transmission covered and everything forward. Anything further back will need to be custom.