2fcknfst

Yes, slow to start, but persistent until the end of days!

Dock

I was speaking to your number of years on Rennlist

royalflushness

Getting my Motion Control 2 Ways dialed with a full corner balance and track alignment

2fcknfst

Ohhhhhhhh...

Cheers Dock! Thank you!

911 Rod

I don't think you will pass inspection without the stickers.

911 Rod

8 posts a day for 6 years! Busy guy.

2fcknfst

But not all meaningful...

Lazurus

You don't say! Kidding - Congratulations are in order ( I think?! )

I got my tires to the installer today and finalizing my usual missing parts list for brake pads and rotors. Quick question if anyone see this, knows or cares....

Anyone ever "reuse" the vibration damper shims on the front? I mistakenly only ordered two and need four. Do they "need" to be affixed with that adhesive backing?? For whatever reason, I remember nothing about the last time I did this. I don;t remember replacing anything other than the rotors and pads. That leaves caliper bolts set screws hardware and well...

I guess I'll find out soon enough.

2fcknfst

When I did pads, I used all new hardware, top to bottom.

A little Shoe Goo on the back of the old shims should do away with any screeching.

racer959

And not one like for others

2fcknfst

Yeah, you can thank my ex for that and the ludicrous need she had for likes on Facebook and Instagram... Toxicity at its best.

That is why I take the time to make positive comments on neat things.

Means more.

Lazurus

Shoe goo. Really!? Ok, thanks. I'll wait for the two missing shims!

racer959

Ok your excused

2fcknfst

Yes, not on the PCCBs, another car - worked well.

718socal

My clutch pedal has become firm during startup. I looked for any leaks and found the Clutch Master Cylinder with some fluid. Should I replace it?