Ultimate Integrated Dry Sump UIDS v2.2
03-25-2022, 04:35 PM
#511
Rennlist Member
Thread Starter
Yep, the top one is yours !!
All 16 were done in UIDS-911 version, but George had 2 blank pieces of aluminum left from previous order, I told him to do UIDS-B/C out of them that were already allocated/payed for..
Just making valves now and screens, and waiting for the material supply issues to be resolved.
All 16 were done in UIDS-911 version, but George had 2 blank pieces of aluminum left from previous order, I told him to do UIDS-B/C out of them that were already allocated/payed for..
Just making valves now and screens, and waiting for the material supply issues to be resolved.
03-25-2022, 05:39 PM
#512
Burning Brakes
I'm in no rush here but this is very exciting. I'll wait patiently and will order one once all the backlog wears out. Thanks Skip! Great job.
The following 2 users liked this post by Fishah:
Formerly996fried (03-26-2022),
Porschetech3 (03-25-2022)
03-25-2022, 05:46 PM
#513
Rennlist Member
Timing ends up working well given the parts I am replacing. Uaos next with oil cooling. I'll get the uids with the next round of production.
The following users liked this post:
Porschetech3 (03-25-2022)
03-25-2022, 05:53 PM
#514
I sent out 97 E-mails with the UIDS Questionnaire, but only received a handful of Questionnaires back.
I wanted to build 100 UIDS on the first run, but George was hesitant, so we decided to build 40 units on the first run and had sourced and priced the material for 40 units. But when we went to order the material it had already sold. We could only source enough material for 16 units and ordered the rest...
Many people had stated they didn't get the E-mail and I sent it to them individually. I don't know what happened, it could be that people are not yet ready, or that the E-mails didn't go out. Yahoo has a limit at 100 E-mails at a time at 10mb, so I know it was under the 100 limit, but don't know about the mb.
But anyway we can only build 16 units at this time, and most of them have already been allocated or payed for with just a few left. Please don't beet me up, and be patient. More will be built when material supply issue is resolved.
I wanted to build 100 UIDS on the first run, but George was hesitant, so we decided to build 40 units on the first run and had sourced and priced the material for 40 units. But when we went to order the material it had already sold. We could only source enough material for 16 units and ordered the rest...
Many people had stated they didn't get the E-mail and I sent it to them individually. I don't know what happened, it could be that people are not yet ready, or that the E-mails didn't go out. Yahoo has a limit at 100 E-mails at a time at 10mb, so I know it was under the 100 limit, but don't know about the mb.
But anyway we can only build 16 units at this time, and most of them have already been allocated or payed for with just a few left. Please don't beet me up, and be patient. More will be built when material supply issue is resolved.
I think I was one of those that didn't get an email. No worries, I'm in no rush...going to be summer before I could pull the trigger on one anyway.
The following users liked this post:
Porschetech3 (03-25-2022)
03-25-2022, 06:31 PM
#515
Rennlist Member
Thread Starter
We are building the valves and screens now. The UIDS will include all new bolts, two 997 return tubes, 1 M10X1.0 black anodized plug, 1 M18 black anodized magnetic drain plug, o-rings...
The following users liked this post:
plpete84 (03-25-2022)
03-25-2022, 08:23 PM
#516
Hey Skip. Let me know if you guys need help sourcing some material. I might be able to point you in the right direction. I'm the Director of Supply Chain for a large aerospace fastener and parts distributor.
03-25-2022, 08:55 PM
#517
Rennlist Member
Thread Starter
The following users liked this post:
Geoff.T (03-29-2022)
03-25-2022, 10:03 PM
#518
Rennlist Member
No pick up tube extension like in other more common setups? If not that’s saying a lot about your system keeping oil where it needs to be.
03-25-2022, 10:14 PM
#519
Rennlist Member
Thread Starter
The following users liked this post:
Sveach756 (03-25-2022)
03-26-2022, 12:32 AM
#520
Rennlist Member
I paid weeks ago can’t wait to get it installed
looks great
looks great
The following users liked this post:
Porschetech3 (03-26-2022)
03-26-2022, 10:37 AM
#521
Rennlist Member
Join Date: Dec 2021
Location: Deep in the woods near PA border in People's Dystopia Republic of New Jersey
Posts: 155
Received 96 Likes
on
58 Posts
Skip, I'll just wait, as I checked my emails ( I have to use a cup and string company ) and at this point, just let me know when it is ready and I'll just do the Paypal thing.......
The following users liked this post:
sdematt (03-26-2022)
03-26-2022, 03:32 PM
#522
Rennlist Member
Thread Starter
The Twin Tunnel Port / UIDS is the only way to get "dry sump" performance in an elegant , compact , economical , easy-to-install way , and not having to resort to a remote tank, extensive hoses/lines, external pump, drives, expense , in a NON-OEM way, and the issues that can result on an M96/7 engine that is already space limited.
03-26-2022, 03:35 PM
#523
Rennlist Member
Thread Starter
BTW : had the logo enhanced by a Pro.....
Last edited by Porschetech3; 03-26-2022 at 04:03 PM.
The following 7 users liked this post by Porschetech3:
damage98MO (06-02-2022),
Formerly996fried (03-26-2022),
Frank Abe (05-17-2022),
GC996 (03-26-2022),
Jnelso (03-26-2022),
and 2 others liked this post.
03-26-2022, 04:37 PM
#524
Rennlist Member
Should be an aero rear wing it’s faster lol
The following users liked this post:
Porschetech3 (03-26-2022)
03-26-2022, 10:26 PM
#525
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
The wing has more down-force for cornering, but the ducktail has a lower COD and more top speed...lol