What did you do to your 996 today?
#8011
Racer
Installed new motor mounts from PRG. Aside from two unscheduled side trips for an 18mm deep socket I somehow didn’t already have and longer bolts because the supplier accidentally supplied the wrong bits, this was a very easy and gratifying job. Hoping to do the transmission mount tomorrow or over the weekend at the latest.
Fait accomplis.
Fait accomplis.
The following users liked this post:
Willys 47 (09-30-2022)
#8012
Nordschleife Master
Track day before the rain at njmp t-bolt. Tomor is probably gonna be too wet.
The following 6 users liked this post by De Jeeper:
golock911 (09-30-2022),
imhighlander (10-01-2022),
Justin76 (09-30-2022),
plpete84 (09-30-2022),
Soul Performance (09-30-2022),
and 1 others liked this post.
#8013
Rennlist Member
No, just cleaned them and laid down the vinyl. I really can’t see them staying yellow for long, and I should hopefully have more free time over the winter when the kids sports are all done (the jokes we tell ourselves!) to refinish them properly.
#8014
Rennlist Member
Nothing major just some interior bling actually for$90 it’s great
The following 7 users liked this post by EVOMMM:
amargari (10-01-2022),
az968gpw (09-30-2022),
Justin76 (09-30-2022),
peterp (09-30-2022),
philbert996 (10-01-2022),
and 2 others liked this post.
#8016
Rennlist Member
I had to do the same.. on mine the plastic broke and allowed one of the edges to pop up higher than the hood.. It broke right where the bolts are under the covers in the corners.. gotta love 20 year old plastic..
The following users liked this post:
philbert996 (10-01-2022)
#8017
Rennlist Member
New wheel center caps. Arctic Silver cab with black top, so they match the car well. The old ones were plain silver.
And, yes, the crests all point toward the valve stems.
And, yes, the crests all point toward the valve stems.
#8018
Race Car
The following users liked this post:
TexSquirrel (10-07-2022)
#8019
Rennlist Member
Thanks guys - yes. Old leak. AOS replaced w UAOS along w vent hose, etc. Just haven't gotten around to cleaning up the whole area.
Made a mess on my garage floor too when changing the sump. Gotta clean that up too.
Made a mess on my garage floor too when changing the sump. Gotta clean that up too.
Last edited by SleepyCyclist; 09-30-2022 at 10:51 PM.
#8020
Burning Brakes
While @De Jeeper was setting personal bests on the 12 turn NJMP Thunderbolt track I was doing the same at their 10 turn Lightning course.
3.2 secs better than a year ago.
3.2 secs better than a year ago.
The following 7 users liked this post by hbdunn:
az968gpw (10-01-2022),
imhighlander (10-01-2022),
JohnCA58 (10-02-2022),
maekwl (10-01-2022),
wdb (10-01-2022),
and 2 others liked this post.
#8021
Rennlist Member
Great speed through that track too bad the weather is going to kill the weekend
#8022
Rennlist Member
Got my personalized plates in. A little obscure, but dropped big clues on the plate frame.
#8023
Rennlist Member
#8024
Rennlist Member
#8025
Began my headlight cover project
Not finished with the project yet . . . but I’m in the process of painting and installing Variel headlight covers for my 996 to give them the 997 round headlight appearance.
Still tweaking the final color. I’ve got a unique Paint to Sample color to match.
The covers have not been installed on the car yet. They are just resting on top of the headlight lenses. They will sit flush once installed.
Still tweaking the final color. I’ve got a unique Paint to Sample color to match.
The covers have not been installed on the car yet. They are just resting on top of the headlight lenses. They will sit flush once installed.
Last edited by RG Najarian; 10-01-2022 at 02:12 PM.
The following 3 users liked this post by RG Najarian: