What did you do to your 996 today?
#6991
Rennlist Member
Tackling the tough jobs.
Replaced the rear wheel arch trim today.
Here’s a list of everything done to my car in the last 8 months:
IMS Solution
Clutch
Flywheel
Rear Main Seal
Air Oil Separator
Timing Chain Tensioners
Spark plugs
Coil packs
Fuel Injectors
Water pump
Low Temp Thermostat
Serpentine Belt, rollers and tensioner
Fuel Filter
Battery
Oil Change and all fluids flushed
So now I’m just waiting for spring to finally arrive
Replaced the rear wheel arch trim today.
Here’s a list of everything done to my car in the last 8 months:
IMS Solution
Clutch
Flywheel
Rear Main Seal
Air Oil Separator
Timing Chain Tensioners
Spark plugs
Coil packs
Fuel Injectors
Water pump
Low Temp Thermostat
Serpentine Belt, rollers and tensioner
Fuel Filter
Battery
Oil Change and all fluids flushed
So now I’m just waiting for spring to finally arrive
#6992
Rennlist Member
Tackling the tough jobs.
Replaced the rear wheel arch trim today.
Here’s a list of everything done to my car in the last 8 months:
IMS Solution
Clutch
Flywheel
Rear Main Seal
Air Oil Separator
Timing Chain Tensioners
Spark plugs
Coil packs
Fuel Injectors
Water pump
Low Temp Thermostat
Serpentine Belt, rollers and tensioner
Fuel Filter
Battery
Oil Change and all fluids flushed
So now I’m just waiting for spring to finally arrive
Replaced the rear wheel arch trim today.
Here’s a list of everything done to my car in the last 8 months:
IMS Solution
Clutch
Flywheel
Rear Main Seal
Air Oil Separator
Timing Chain Tensioners
Spark plugs
Coil packs
Fuel Injectors
Water pump
Low Temp Thermostat
Serpentine Belt, rollers and tensioner
Fuel Filter
Battery
Oil Change and all fluids flushed
So now I’m just waiting for spring to finally arrive
I am going thru the same exercise.
#6993
Picked the car up today…gonna drop it off this afternoon while Imm out of town to get the spoiler installed.
The following users liked this post:
plpete84 (03-29-2022)
The following users liked this post:
Nate.Evans (03-29-2022)
#6995
Three Wheelin'
Wheels look great.
The following 3 users liked this post by second2none:
#6997
Three Wheelin'
PDR, beers, liquor and food
Got one of my friends 99 Aero, my car and two others for PDR. Was able to get work done on two of the 4 cars. To fix the rear driver quarter on both P cars, we either drill thru the back tail lamp or we need to be able to remove the inside back panel. We will work on that latter. Pretty good technician, so I believe I found who I’m constantly going to recommend for this type of work. Chow today was pork chops, Parmesan garlic mashed potatoes and good ole green beans casserole.
Sorry pictures was after I had served every one including my son.
Green beans casserole is always great almost all gone.
Mashed potatoes are always a hit, throw a bit of mayonnaise there and even if you can’t taste it , makes a big difference with the finished product.
The AERO had a bunch of issues on the frunk. Almost like they closed the hood with something inside there. Other issues where on the passenger side door.
My other friend was flying his drone. While I was blasting the Jams.
Sorry pictures was after I had served every one including my son.
Green beans casserole is always great almost all gone.
Mashed potatoes are always a hit, throw a bit of mayonnaise there and even if you can’t taste it , makes a big difference with the finished product.
The AERO had a bunch of issues on the frunk. Almost like they closed the hood with something inside there. Other issues where on the passenger side door.
My other friend was flying his drone. While I was blasting the Jams.
#6998
Rennlist Member
Those drones make great videos
nice get together
nice get together
#6999
RL Community Team
Rennlist Member
Rennlist Member
Exhaust first and spoiler Second.
That’s exactly what I would have done!
Last edited by TexSquirrel; 03-29-2022 at 09:29 PM.
The following users liked this post:
EVOMMM (03-29-2022)
#7000
Rennlist Member
Purchased a bumperette delete panel from Cypher Design. These guys did a phenomenal Job. (Original photo with bumperettes posted last for comparison)
#7001
RL Community Team
Rennlist Member
Rennlist Member
#7002
Rennlist Member
Believe cost will vary with color, standard black matte, gloss etc $175, but looks like they are doing a sale at $75. Believe he makes them in batches. Had a few months wait but well worth it.
https://cyphervehicledesign.com/coll...e-delete-panel
https://cyphervehicledesign.com/coll...e-delete-panel
Last edited by C2-996; 03-29-2022 at 11:35 PM.
#7003
RL Community Team
Rennlist Member
Rennlist Member
Believe cost will vary with color, standard black matte, gloss etc $175, but looks like they are doing a sale at $75. Believe he makes them in batches. Had a few months wait but well worth it.
https://cyphervehicledesign.com/coll...e-delete-panel
https://cyphervehicledesign.com/coll...e-delete-panel
#7004
Rennlist Member
#7005
RL Community Team
Rennlist Member
Rennlist Member
The following users liked this post:
C2-996 (03-30-2022)