What did you do to your 996 today?
#6181
Rennlist Member
The high speed runs were done at undisclosed private airport runway
Last edited by EVOMMM; 11-07-2021 at 03:36 PM.
The following users liked this post:
wdb (11-12-2021)
#6182
#6183
Rennlist Member
Yes so far weather permitting we are going to the Mill cafe in NJ we should be there around 8:30 am we leave 7:30 from the target parking lot off of veterans road in Staten Island
The following users liked this post:
Manny_911 (11-08-2021)
#6184
I've bought the wheel stud conversion kit. You can get them in 50mm, 60mm or for $15 more, a "full d-bag" 75mm.
I went “full d-bag.” How often in life can one go “full d-bag” for only an extra $15?
I went “full d-bag.” How often in life can one go “full d-bag” for only an extra $15?
#6185
Rennlist Member
#6186
Rennlist Member
I updated/upgraded my Litronic headlights with Retrofit Labs projectors (I used my existing Phillips extreme vision bulbs). Wow! What a difference... Amazing difference
#6187
Rennlist Member
#6188
#6189
Rennlist Member
Check out the video on YouTube of the retrofit. The bottom photo is the projector itself. Top photo shows the brackets you install to mount them to the light module. It’s very straight forward...
Last edited by dporto; 11-09-2021 at 05:33 PM.
The following 2 users liked this post by dporto:
c210rg (11-09-2021),
TheUnscented (11-09-2021)
#6190
I now have a Numeric Racing short shift kit with new cables. OMG, what a difference, I love the reduced throw and mechanically precise feel. I added a Black Forest Industries shift boot and **** as well.
#6191
Three Wheelin'
Was always wondering how the BFI shift **** would look, I like them and now I might have to add one since my shifter has seen better days.
Had a reschedule on detail today so among other things I took some time to clean my carpets. This is from the passenger side and after I ran the clean water through the hose, the driver side was much darker.
Had a reschedule on detail today so among other things I took some time to clean my carpets. This is from the passenger side and after I ran the clean water through the hose, the driver side was much darker.
The following users liked this post:
TomObear (11-09-2021)
#6192
The following 2 users liked this post by TomObear:
Flat6Motorsports (11-10-2021),
Matt Chapman (11-24-2021)
#6193
The following users liked this post:
Flat6Motorsports (11-10-2021)
#6194
RennLine, the steel ones, veteran discount through CarID.
In the kit they sent me 20 lug nuts but only 19 lug studs. I thought the 5% discount was only on the price, but I suppose you’ve got to read the fine print.
Lug number 20 should arrive on Saturday.
In the kit they sent me 20 lug nuts but only 19 lug studs. I thought the 5% discount was only on the price, but I suppose you’ve got to read the fine print.
Lug number 20 should arrive on Saturday.
#6195
The BFI shift boot quality is superior to OEM Porsche in my opinion. Thicker and more supple and available in several colors of stitching as well. When I initially had **** installed on stock shifter it sat noticeably higher than stock. If you have the trim ring for your boot it has to be detached from stock boot because the ring is not available separately. That being said, I love the shifter. With new cables there is a noticeable increase in cabin sound because boot around cables must be cut to fit bigger cables. YMMV.