What did you do with your 993 today
The following 2 users liked this post by mhm993:
max911 (08-28-2021),
needmoregarage (08-28-2021)
#3183
Rennlist Member
^^ I think you win today's contest Marc !!
#3184
Rennlist Member
-Cars and Coffee
-A drive over the Pensacola Bay Bridge
-A stop at a bizzare baseball card/gold and silver coin/die cast car/NASCAR store so my son cold look for matchbox cars - got to watch him bargain $3 off of two cars
-A drive over the Pensacola Bay Bridge
-A stop at a bizzare baseball card/gold and silver coin/die cast car/NASCAR store so my son cold look for matchbox cars - got to watch him bargain $3 off of two cars
#3185
Rennlist Member
Put back my center console after installing the Numeric shift box. But first I rewrapped the wires with cloth tape and took the advice on using screws and nuts to fasten the ebrake transmitter thing.
The following 5 users liked this post by 95_993:
911F1 (08-29-2021),
LimeyBoy (08-29-2021),
masti99 (08-29-2021),
needmoregarage (08-29-2021),
SpeedyC2 (08-30-2021)
#3187
Rennlist Member
I recently bought a set of Cup II rims from Rudy to have refinished in the steel grey color scheme. My car was optioned new with the technology package so I have the hollow spokes but have always felt like the Vesuvio car should have the two toned Cup II rims. Just mounted them yesterday. Absolutely loving the look. Wish Rudy was still around to show him the finished result. I've done a ton to the car in my first year of ownership. I'll have to do an update post at some point soon.
The following 4 users liked this post by milazzo_997tt:
#3188
Burning Brakes
#3190
Changed out 24 year old stone guards
They came off fairly easy with UV light and steamer
ordered clear ones from FISTER and used them as a template to make satin black
kind of a retro look and I like them. Ran them over the rocker panel to protect it as well
They came off fairly easy with UV light and steamer
ordered clear ones from FISTER and used them as a template to make satin black
kind of a retro look and I like them. Ran them over the rocker panel to protect it as well
Last edited by JParanee; 09-03-2021 at 12:13 AM.
The following 3 users liked this post by JParanee:
The following 4 users liked this post by red64chevelle:
#3192
Burning Brakes
Got the 993 back from BBi Autosport this morning, having done some updates to the engine bay:
-New fan (painted Arena Red to match the car) and new fan shroud
-Clewett serpentine belt conversion
-MPL clutch slave cylinder (paired up with existing RS clutch, LWF, and remote bleeder setup)
-New distributors
-Air intake assembly and injectors cleaned
-AC compressor bracket replaced with RS version console
-Rennline engine carrier
-Gasket refresh
-New fan (painted Arena Red to match the car) and new fan shroud
-Clewett serpentine belt conversion
-MPL clutch slave cylinder (paired up with existing RS clutch, LWF, and remote bleeder setup)
-New distributors
-Air intake assembly and injectors cleaned
-AC compressor bracket replaced with RS version console
-Rennline engine carrier
-Gasket refresh
The following 4 users liked this post by Mr.Woolery:
#3193
Rennlist Member
Originally Posted by red64chevelle
Ducktail is on. I made a new harness to plug the third brake light into the factory decklid harness.
Last edited by gavonder; 09-04-2021 at 08:42 AM.
#3194
Had the best PDR guy in our area go over the car and make it perfect 😀
The following 2 users liked this post by ClassicAndy:
Fabspeed Motorsport (09-09-2021),
INTMD8 (09-08-2021)