What did you do with your 993 today
The following 4 users liked this post by os993:
#3153
#3154
Rennlist Member
Originally Posted by Watson
Looks great! Could you please share the reference of the Thule roof bars you have on your 993? Is that OK if the bike rack is not horizontal (it seems a little bit low)? Thanks!
I don't remember what ref # they are. Simple standard rain gutter racks bought 20yrs ago. Yes not horizontal to ground. These are no way 993 specific racks, and if I wanted to, I guess, I would use taller rear mounting legs. But it works, bikes don't fly off and everything stays put on windy roads. Simple on/off and done. I don't use them much, but it's always fun to use them. Extra fun with a surf board. Makes the Porsche feel really "daily useful ", if you get my drift.
The following users liked this post:
alsamrob4 (08-16-2021)
#3157
Instructor
Will do, I'm looking forward to a little improvement, they state 30% which should be noticable. I bought it directly from MPL, if I recall correctly it took about a week to be delivered which was impressive. And then it sat while I pondered the install. At the price it would have been nice for it to ship compete, but swapping the 4 or 5 items wasn't a big deal.
https://mpl-tuningparts.de/produkt/p...ehmerzylinder/
Amazon claims they're dropping of the bleeder Thursday. However I'm still waiting on the ballasts....
https://mpl-tuningparts.de/produkt/p...ehmerzylinder/
Amazon claims they're dropping of the bleeder Thursday. However I'm still waiting on the ballasts....
I haven't driven it yet as I replaced both ballasts (both ugly) and now waiting on one of the bumperette brackets....but the clutch pedal effort is definitely reduced. Fingers crossed the engagement point is lower....I felt it was too high before.
#3158
Thanks! Lots of fun using them. For those who shaved your rain gutters, your missing out! .
I don't remember what ref # they are. Simple standard rain gutter racks bought 20yrs ago. Yes not horizontal to ground. These are no way 993 specific racks, and if I wanted to, I guess, I would use taller rear mounting legs. But it works, bikes don't fly off and everything stays put on windy roads. Simple on/off and done. I don't use them much, but it's always fun to use them. Extra fun with a surf board. Makes the Porsche feel really "daily useful ", if you get my drift.
I don't remember what ref # they are. Simple standard rain gutter racks bought 20yrs ago. Yes not horizontal to ground. These are no way 993 specific racks, and if I wanted to, I guess, I would use taller rear mounting legs. But it works, bikes don't fly off and everything stays put on windy roads. Simple on/off and done. I don't use them much, but it's always fun to use them. Extra fun with a surf board. Makes the Porsche feel really "daily useful ", if you get my drift.
#3159
Rennlist Member
Reached an appropriate milestone last night.
The following 5 users liked this post by alsamrob4:
1997hmc993 (08-29-2021),
Cadaver (08-16-2021),
needmoregarage (08-16-2021),
sacman (08-16-2021),
Watson (08-16-2021)
#3160
Installed a carbon fiber pad keeper from Marcus. Very happy.
The following 2 users liked this post by 71-3.0-911:
1997hmc993 (08-29-2021),
jam16 (12-28-2021)
The following 6 users liked this post by cool911air:
993.Coupe (08-18-2021),
993AerCooler (08-18-2021),
jam16 (12-28-2021),
kingroon (08-18-2021),
needmoregarage (08-18-2021),
and 1 others liked this post.
#3162
Instructor
Completed the ballast installs and re-installed front bumper cover; was my first time removing it so while a little finicky it wasn't too painful. One directional and fog light was cracked so I ended up replaced both sets (ouch $$). Hope to take it out tonight to finally test the MPL cylinder.....the saga continues
#3163
very cool badge!
Do you have pictures of how your badge is attached from the inside? I am trying to put a badge on my 993 as well but the rear spoiler grill is quite thick so I need to lengthen the little threaded cylinders behind my badge otherwise they are too short.
Do you have pictures of how your badge is attached from the inside? I am trying to put a badge on my 993 as well but the rear spoiler grill is quite thick so I need to lengthen the little threaded cylinders behind my badge otherwise they are too short.
#3164
#3165
Originally Posted by Watson
Very beautiful! where can we buy it if you don't mind? Thanks!
MarcusBuehler911@web.de
Shipping costs are terrible though.
-Scott