What did you buy your 992 today thread
#766
3M 2080 G13 GLOSS HOT ROD RED 3in x 5in (SAMPLE SIZE) Car Wrap Vinyl Film
$1.99 on Amazon
I cut a strip along the 5" edge 5/16" wide.
The color side of the film comes with a very thin clear coating that you need to remove before installation. The adhesive on the backside of the tape will not adhere to the clear film when you wrap the tape over itself.
Lastly I used a very thin plastic trim tool to tuck the edges in around and into the circular grooves on the steering wheel that you are covering with this tape.
.
$1.99 on Amazon
I cut a strip along the 5" edge 5/16" wide.
The color side of the film comes with a very thin clear coating that you need to remove before installation. The adhesive on the backside of the tape will not adhere to the clear film when you wrap the tape over itself.
Lastly I used a very thin plastic trim tool to tuck the edges in around and into the circular grooves on the steering wheel that you are covering with this tape.
.
Any idea on how easy it will be to get off with regards to leaving residue?
Would love to find a thin leather strip
#767
Yes there is always something else to add or do if you stay on here long enough..both pre car delivery and most definitely after it arrives! LOL
BTW did any of you guys get a gift from Porsche? Mine arrived today. Nice pen!
Package from Porsche
Nice welcome to your 992 setup
BTW did any of you guys get a gift from Porsche? Mine arrived today. Nice pen!
Package from Porsche
Nice welcome to your 992 setup
The following users liked this post:
dgasmd (12-23-2020)
#768
Rennlist Member
The following 3 users liked this post by chong0:
The following users liked this post:
chong0 (12-23-2020)
#771
Three Wheelin'
https://carbonio.com/collections/por...se-plate-mount
Last edited by ryandarr1979; 12-23-2020 at 09:51 PM.
The following users liked this post:
mikey94025 (12-23-2020)
#772
Three Wheelin'
No worries Perm, I get it. Carbonio makes a spring loaded bracket that mounts under the bumper in seconds with no drilled holes, using existing holes in the bottom of the bumper. Massachusetts requires a front plate. I just put this on to get an inspection sticker. I’m planning on having it spend most of its time in the frunk. I’m going to make some tweaks to get it a little higher but not too much so that it doesn’t impede the front camera. This is a horrible angle shot but the plate actually sits higher than the front splitter by quite a bit. I would have taken the picture lower and kneeling but didn’t want to get my slacks wet and dirty from the snow.
https://carbonio.com/collections/por...se-plate-mount
https://carbonio.com/collections/por...se-plate-mount
Oh I see. I was going to say, that doesn’t seem like your style.
I have a 15 dollar Amazon plate mount that I double stick taped to the bumper for fix it tickets. Otherwise I rock no front plate. I got caught once and simply taped it one, got it sighed off, payed the fine and off it went until next time.
ICBEAMER Black Universal Front Aluminum Bumper License Plate Mount Relocator Frame Bracket Holder Bar [Drilling Require] https://www.amazon.com/dp/B07HCWQ319/ref=cm_sw_r_cp_api_glc_fabc_ZT.4FbEMVYVFR
Last edited by BIGWORM; 12-23-2020 at 10:24 PM.
#774
Rennlist Member
They grow up so fast...
First was the White 911
Second one was the AG 911
And this Christmas. LO 911
Merry Christmas!
First was the White 911
Second one was the AG 911
And this Christmas. LO 911
Merry Christmas!
Last edited by smiles11; 12-24-2020 at 06:53 PM.
The following 5 users liked this post by smiles11:
markjeansonne (12-27-2020),
Overdraft (12-24-2020),
SamD (12-26-2020),
Tanqueray86 (12-27-2020),
Tupper (12-24-2020)
#775
Burning Brakes
Key covers / from Amazon
And ... however popular (or not) comes close to matching the (deviated) speed blue seat centers in my 992TTS.
in for a dime ... in for a dollar!
Last edited by peterdouglas; 12-24-2020 at 07:22 PM.
#776
LOL I love the tile - I have two lined up waiting and waiting. Unfortunately having two brightly covered keys is still not going to be good enough to stop me from losing the keys.
The following users liked this post:
peterdouglas (12-27-2020)
#777
Welp, bought a set of these for my new 992 and then got a second set thrown in by my dealer. By far the easiest aesthetic mod you can do. Huge visual impact.
I guess I’ll sell the second set, send a PM if you want to save a few bucks off Suncoast.
I guess I’ll sell the second set, send a PM if you want to save a few bucks off Suncoast.
#778
Three Wheelin'
Just installed mine—took < 5 minutes and oh what a difference!
#779
Rennlist Member
Join Date: Aug 2020
Location: Orange County California
Posts: 2,779
Received 2,620 Likes
on
1,233 Posts
Garmin Mini-Cam, Test Run, 2 Min Video Example
FYI
I installed a Garmin Dash Mini-Cam yesterday. (Picture of Camera Below)
The link to YouTube, is a short (2 minute) video capture that I saved from the camera today.
It seems to do a fairly good job. Or at least better than I'd expected.
.
I installed a Garmin Dash Mini-Cam yesterday. (Picture of Camera Below)
The link to YouTube, is a short (2 minute) video capture that I saved from the camera today.
It seems to do a fairly good job. Or at least better than I'd expected.
The following 3 users liked this post by Bluehighways:
#780
Rennlist Member
FYI
I installed a Garmin Dash Mini-Cam yesterday. (Picture of Camera Below)
The link to YouTube, is a short (2 minute) video capture that I saved from the camera today.
It seems to do a fairly good job. Or at least better than I'd expected.
https://youtu.be/3Shscw7m8ys
.
I installed a Garmin Dash Mini-Cam yesterday. (Picture of Camera Below)
The link to YouTube, is a short (2 minute) video capture that I saved from the camera today.
It seems to do a fairly good job. Or at least better than I'd expected.
https://youtu.be/3Shscw7m8ys
.
How big is this unit - it looks relatively small. Could you post a pic of it installed to see the scale? Also, what was the main reason you installed the camera? Insurance?