Trackmunkey

There's a few videos online. But it's easy.

Put pressure inwards towards inside the fender while pushing forward towards the front of the car. The rear part of the marker should pop out. Use your free hand to pull the rear part of the marker out towards you.

Unclip the light and bobs your uncle.

BigLoue

Do you have before pics you can show? Many thanks

John Mclane

Low profile floor jack, a bit less than 3". Ready to match with Jackpoint, low enough not to need an extra 2x4 under the tires, but barely.

Next, pad/wheel swap for the winter

drgav2005

A set of winter mats and a set of Michelin Alpin 5 winter tyres... Still waiting for the rears to be delivered.

drgav2005

They look fantastic!
I'm currently toying with the idea of spraying my spyder alloys satin black to get a similar look. Quite a polarising post on another forum ranged from NO! Burn the heretic! To Do it, it will look awesome!

Kansas32

I used duct tape, put it on the amber light with a pull tab and just pulled slightly and the light popped out.

Tanqueray86

Here's the before, with Exclusive Design Wheels

Tanqueray86

If you are going to change the color of your wheels, powder coat, don't just have the wheels painted.

BigLoue

Thanks for posting

dgasmd

i actually
like the spider wheels so much better. Both are nice though. If you are planning to keep both sets, I’d leave the spider ones as is for a change

Schwarz992C4S

So the latest addition was a 2nd set of wheels/tires (winter). Had to pick up the storage bags as well. 😂

Kcposche25

Did you do this at a local leather shop? Or is this from the factory? Would love to do this to mine, great idea!

Kcposche25

Did you do this at a local leather shop? Or is this from the factory? Would love to do this to mine, great idea!

John Mclane

PIWIS 3

Kansas32

Put a little duct tape on the light and pull it toward the wheel. The light pops out.