What did you buy your 991 today thread
#7441
Burning Brakes
I started at the front, then the sides and finally the retainers in the center. My brain was yelling "you'll break it!" as I was puling up, but it came out. Pull vertically as close as you can to the clips. The rest is pretty easy until you get to the needles... They are made of feathers from baby angels, treat them with care.
#7443
Soul Performance exhaust install. Miles of smiles
Last edited by sbrooks64; 12-23-2022 at 05:59 PM.
#7444
Drifting
Got car back from detailer. Ceramic, new ppf, and Rennlight restored headlights on! Several aesthetic painted parts waiting to be coated and then installed. Nice to have her back after a 7 week wait!
The following 5 users liked this post by SConn:
Clubber (12-23-2022),
jesm (12-25-2022),
jrider36 (12-27-2022),
Porsche_nuts (12-25-2022),
Wing Commander (12-23-2022)
#7445
Rennlist Member
Fun little project for my 911S, i did the GTS/Sport design bumper conversion in my garage. For any who haven’t done it it’s really not hard and doesn’t really require coding i wound up just take off the little motors and fixing to the back side of the center plastic. Well worth it and satisfying mod haha
The following 5 users liked this post by keebin:
GermanCarFan1 (03-02-2023),
jesm (12-25-2022),
P991GTS (12-25-2022),
RGS (12-26-2022),
SConn (12-25-2022)
#7447
Rennlist Member
Fun little project for my 911S, i did the GTS/Sport design bumper conversion in my garage. For any who haven’t done it it’s really not hard and doesn’t really require coding i wound up just take off the little motors and fixing to the back side of the center plastic. Well worth it and satisfying mod haha
The following users liked this post:
Spectre65 (01-03-2023)
#7448
Rennlist Member
Okay, let’s see:
Center light/reflector from the C4S
Permanent mount & hardwire kit for my Uniden R7
Magsafe charger and install kit
Clear side reflectors
“Porsche” puddle lights
Frunk liner
Dog seat for the rear (and Rex Specs for the pup)
GT3/GT4-style PDK **** and boot
FVD tuner
BMC air filter
Center light/reflector from the C4S
Permanent mount & hardwire kit for my Uniden R7
Magsafe charger and install kit
Clear side reflectors
“Porsche” puddle lights
Frunk liner
Dog seat for the rear (and Rex Specs for the pup)
GT3/GT4-style PDK **** and boot
FVD tuner
BMC air filter
The following users liked this post:
Spectre65 (01-04-2023)
#7449
Drifting
Ugh... Was not liking how the Moshammer ram air intake covers were fitting, so bit the bullet and got the RS intakes instead.
You know the old saying...buy it once, buy it right.
You know the old saying...buy it once, buy it right.
#7450
Rennlist Member
On the standard bumper/S they have these grill slats that are active and open and close depending on speed and drive selection. When converting to sport design/GTS bumper it’s advised to take it in for coding to code out the motors that power the slats. It’s normally an hour of labor they charge but you can just simply leave them plugged in and just fix them to the back side of the bumper.
The following users liked this post:
PathfinderGTS (12-25-2022)
#7451
Rennlist Member
I would pick up the Suncoast sport design package comes with everything you need. I sourced all the parts separately and i wish i did not lol. You save so much more just going with the sun coast package.
#7453
#7454
A little buddy!
The following 3 users liked this post by rchaas:
#7455
Drifting
I had them painted body color and went to install them. Used the putty they provided and I was not happy at all. Lots of gaps in fitment, definitely not flush. It may not have bothered some, but I wasn't liking it.
However...they could potentially fit better if someone wanted to have them sanded down in the problem areas. But, I just decided to cut my losses and order the outrageously over priced RS ones.
If anyone is interested in purchasing my old Moshammer ones, PM me. Currently painted metallic jet black. Open to offers.