Sport Chrono Package incl. Porsche Track Precision App
#91
I've been using the Optrix case and mount for my track bike, but I highly recommend Ram mounts for car window set ups. I've used the Ram mount option for a couple years mounted immediately below the rear view mirror with the iPhone in landscape mode. Note, both hardware setups were for use with the Harry's Laptimer software.
#95
Nordschleife Master
Get the track precision app for the novelty of it and if you like the 'clock'
#97
Nordschleife Master
Unfortunately, not directly. You will need to use 3 party software like dashware, race render, or trackvision to merge the data from solo DL onto video from gopro. This yields the best results, but requires you to do the work, whereas smartycam is drive and watch.
#98
orthojoe, given what you know, are you still getting the chrono clock/track app?
#99
Nordschleife Master
I have the AiM solo DL already and plan to use it on the GT3. However, I also optioned the sport chrono/track app just because I was curious how it would work and want to play around with it. I also wanted a red clock...
#100
#101
http://files2.porsche.com/filestore....e-001a64c55f5c
At the tracks that are not pre mapped it would require using the gps during a practice lap to put the map into the database.
#102
Some of those tracks are in the database according to Porsche (See link below) so the system will work at those locations, they're just not predefined / mapped for you to see.
http://files2.porsche.com/filestore....e-001a64c55f5c
At the tracks that are not pre mapped it would require using the gps during a practice lap to put the map into the database.
http://files2.porsche.com/filestore....e-001a64c55f5c
At the tracks that are not pre mapped it would require using the gps during a practice lap to put the map into the database.
#103
Suncoast now has an upgrade kit for a non sport chrono car to add the track precision support to the PCM. Still too expensive when compared to AIM SoloDL, really like mine.
http://www.suncoastparts.com/product...newproductpage
http://www.suncoastparts.com/product...newproductpage
Last edited by Todd B; 11-26-2014 at 07:41 AM.
#104
Anybody successfully record a video with this on a 2015? Would love to drop this from my build if it is no good.