951 Winter Project - carnage photos inside - updated
#377
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by MPD47
I didnt spend $4k on it, but I did drop about $200 on that stuff, hahaha. I bought it back in June when I saw it on a friend's RX7.
#378
Former Vendor
Nice work, Mike! I hope that you'll make, after installing that fuel cell, a real diffuser under your car. I would do so if I just had less perfect car. Exhaust out from the middle, like in F360/430.
#382
Rainman
Rennlist Member
Rennlist Member
At least the center console is still intact....
I assume this is turning into a track car...if so, find a nice big steel plate and weld it to the floor to cover that hole where the seats used to be. After that bolt in a nice 09438393893580584395085085435 million point roll-cage (essentially a wall) and you'll be good to go (around 100 lbs lighter too)
If it's returning to street duty...put some HUGE speakers where the kids used to sit. Or make it like a locking trunk area/beer cooler.
I assume this is turning into a track car...if so, find a nice big steel plate and weld it to the floor to cover that hole where the seats used to be. After that bolt in a nice 09438393893580584395085085435 million point roll-cage (essentially a wall) and you'll be good to go (around 100 lbs lighter too)
If it's returning to street duty...put some HUGE speakers where the kids used to sit. Or make it like a locking trunk area/beer cooler.
#383
The Carnage King
Rennlist Member
Rennlist Member
Thread Starter
It is a track car, and no welding for floor pieces. Everything will be light gauge aluminum and removable. Yes the car is getting caged, I'm on the schedule for the local place that does 6 second drag cars and the occasional SCCA racer for the first week in April.
Oh yeah, and that center console is trash, I'll be taking it out soon. I'd be working on the car, but I promised I'd help assemble a 1993 RX7 (FD) with an LS1 swap on the weekends.
Oh yeah, and that center console is trash, I'll be taking it out soon. I'd be working on the car, but I promised I'd help assemble a 1993 RX7 (FD) with an LS1 swap on the weekends.
Last edited by MPD47; 02-24-2007 at 11:44 PM.
#385
The Carnage King
Rennlist Member
Rennlist Member
Thread Starter
Uhh, no, to busy, not coming down Probably best PM me about shipping. The FD is entertaining, but there is a photo aparently being put up today of my flicking everyone off while wedging myself under the dash to help run the main harness for the LS1.
#388
The Carnage King
Rennlist Member
Rennlist Member
Thread Starter
Nah, I had to move a TON of stuff to get that the way it is, and none of my tools are there. It's a family member's house I take care of in the winter.