951 Winter Project - carnage photos inside - updated
#1
The Carnage King
Rennlist Member
Rennlist Member
Thread Starter
![Thumbs down](https://rennlist.com/forums/images/icons/icon13.gif)
Ok, interior is stripped down to the dashboard, torque tube is disconnected and just needs to be pulled out tomorrow. I tried something new and dropped the entire rear end as one piece. Trailing arms, coilovers, subframe, transaxle, etc etc. Photos basically speak for themselves.
Sharing the garage with my father's car for now, so we can refresh his 40+ year old trans.
Along with a seized torque tube, here is the other reason why it's all coming apart. Blown transaxle!
So Chris, yes I have a valid reason for not attending the track day at the Glen.
![](http://www.mturck.com/944/Nov06/100_8109.jpg)
![](http://www.mturck.com/944/Nov06/100_8111.jpg)
![](http://www.mturck.com/944/Nov06/100_8116.jpg)
Sharing the garage with my father's car for now, so we can refresh his 40+ year old trans.
![](http://www.mturck.com/944/Nov06/100_8120.jpg)
![](http://www.mturck.com/944/Nov06/100_8124.jpg)
![](http://www.mturck.com/944/Nov06/100_8130.jpg)
![](http://www.mturck.com/944/Nov06/100_8134.jpg)
![](http://www.mturck.com/944/Nov06/100_8136.jpg)
Along with a seized torque tube, here is the other reason why it's all coming apart. Blown transaxle!
![](http://www.mturck.com/944/Nov06/100_8101.jpg)
![](http://www.mturck.com/944/Nov06/100_8104.jpg)
![grr](https://rennlist.com/forums/graemlins/cussing.gif)
So Chris, yes I have a valid reason for not attending the track day at the Glen.
Last edited by MPD47; 11-04-2006 at 07:40 PM.
#4
The Carnage King
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It's fairly easy once you get the balance point, though I'd recommened taking the two large bolts that connect the subframe to the chassis (on the very edges, the horizontal ones) out first. They tend to bind anyway and I took them out last, oops! You need to be VERY carefuly with jackstand placement so you dont drop anything on yourself. I did this in about 15 steps checking and rechecking stands to make sure I was safe the whole time. Other than that, it was fairly easy, but I've also taken the rear apart a dozen times before in peices. It's much easier to tear it all down if you pull it out in one piece IMO.
#7
Addict
Rennlist Member
Rennlist Small
Business Sponsor
Rennlist Member
Rennlist Small
Business Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by MPD47
So Chris, yes I have a valid reason for not attending the track day at the Glen.
Trending Topics
#10
The Carnage King
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Ok, pulled all the bodywork (minus doors and hatch) today, along with the engine, all remaining suspension components, front crossmember, radiator, oil cooler, exhaust, crossover pipe, turbo etc. Need to pull one more brace (4 13mm bolts) and the torque tube is on the ground. Exhausted.
![](http://www.mturck.com/944/Nov06/100_8141.jpg)
![](http://www.mturck.com/944/Nov06/100_8147.jpg)
![](http://www.mturck.com/944/Nov06/100_8159.jpg)
![](http://www.mturck.com/944/Nov06/100_8168.jpg)
*gasp* where'd it go!
![](http://www.mturck.com/944/Nov06/100_8162.jpg)
![](http://www.mturck.com/944/Nov06/100_8165.jpg)
![](http://www.mturck.com/944/Nov06/100_8141.jpg)
![](http://www.mturck.com/944/Nov06/100_8147.jpg)
![](http://www.mturck.com/944/Nov06/100_8159.jpg)
![](http://www.mturck.com/944/Nov06/100_8168.jpg)
*gasp* where'd it go!
![](http://www.mturck.com/944/Nov06/100_8162.jpg)
![](http://www.mturck.com/944/Nov06/100_8165.jpg)
![](http://www.mturck.com/944/Nov06/100_8169.jpg)
#15
The Carnage King
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Parting? Surely you jest ![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
Going to add a few things over the winter, mostly changing stuff I wasnt happy with or thought could be improved. We'll see how much I get to, I dont really want to go into specifics right now engine wise. You can assume new seats, 6 point cage (main hoop, frame rail connectors, xbrace) and fixing the transaxle. We'll see what funds allow for above and beyond that.
I knew it was only a few other bolts to pull the engine once I was commited to the transaxle and torque tube coming out so figured "why not" and it allows me to clean/fix all the stuff I wanted to last year before I got it back on the road.
Bit different then when you saw it all put together in my driveway what, 56 hours ago? I actually got the engine out in under 4 hours this time, new record for me without a lift (did it in like 3 1/2 with a lift). The entire rear end was out in well under 2 hours.
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
Going to add a few things over the winter, mostly changing stuff I wasnt happy with or thought could be improved. We'll see how much I get to, I dont really want to go into specifics right now engine wise. You can assume new seats, 6 point cage (main hoop, frame rail connectors, xbrace) and fixing the transaxle. We'll see what funds allow for above and beyond that.
I knew it was only a few other bolts to pull the engine once I was commited to the transaxle and torque tube coming out so figured "why not" and it allows me to clean/fix all the stuff I wanted to last year before I got it back on the road.
Originally Posted by shiners780
Damn dude. What are you doing? I mean, I realize the tranny work, but... ![EEK!](https://rennlist.com/forums/images/smilies/eek.gif)
![EEK!](https://rennlist.com/forums/images/smilies/eek.gif)