So what did you do to your 928 Today......
#601
Greg, yes I'm still planning on going to SITM. I'm about 85 percent done with the work I wanted to take care of before the SITM weekend. I'm hoping to get the a/c squared away for the trip. The receiver dyer should be here this week and I'm going to try and change it out next weekend. I'm hoping we can get together to sort out the a/c before the trip.
#603
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Oct 2001
Posts: 20,506
Likes: 549
From: Bend, Oregon
I used a large three-jaw puller with just hand tension on the bolt to add a little pre-load out. With that, a few taps of the mallet got it loose amd started towards freedom. The hand tension is hand on a socket but no ratchet on the center bolt of the puller.
#605
I have a large two jaw that would fit the diameter of the dampner but to get it in there would require pulling the rad. All the other dampners I've pulled just required a bit of tugging and wiggle to ease them to freedom. Helmut is being a bastard for me letting him sit for a year in need of a new water pump, me thinks... Perhaps I'll visit the local parts store and see if they have a puller that would fit, something like the old proto sets we had in Dutch.
#606
#607
Top speed
So, at what rpm do your S2's reach top speed?
Leo 928 euro s2 5spd 1984
#608
RMB
I just resonated my rmb.
The stock muffler is to quite for me and the rmb to noisy....
I can,t weit to install it to hear the sound...
The stock muffler is to quite for me and the rmb to noisy....
I can,t weit to install it to hear the sound...
Last edited by dimi5928; 05-17-2011 at 11:09 PM.
#609
Comming home from yesterday's Coffee and Cars (see http://www.vimeo.com/21858049 ) my alternator stopped alternating.... so today I put in a new one I happened to have on the shelf. And all is in good order again.
For a good grin from yesterdays people leaving the Coffee and car show check out this lucky GTO driver http://www.boostedimports.com/forums...ad.php?t=28445 candidate for a jackass award I think...
For a good grin from yesterdays people leaving the Coffee and car show check out this lucky GTO driver http://www.boostedimports.com/forums...ad.php?t=28445 candidate for a jackass award I think...
#611
Replaced the CPS, throttle quad to throttle body cable, and cruise control cable. Oh, and noticed when I put the wheel back on that the adhesive balance weights came off in the garage floor. Guess it's time to get those new front tires...
#612
Finished (FINALLY!) wiring up the amps, speakers and install of the SharkWoofer. Replaced window switches, topped off PS and brake fluid.
Still need to do some more tweaking on the gains on the amps but other than that the SharkWoofer KICKS BUTT!
Still need to replace clutch master cylinder, have the parts but running out of time. Gonna give Sean a ring to see if he can do this week for me..
Still need to do some more tweaking on the gains on the amps but other than that the SharkWoofer KICKS BUTT!
Still need to replace clutch master cylinder, have the parts but running out of time. Gonna give Sean a ring to see if he can do this week for me..
#613
For a good grin from yesterdays people leaving the Coffee and car show check out this lucky GTO driver http://www.boostedimports.com/forums...ad.php?t=28445 candidate for a jackass award I think...
I washed EURO85 today and the drove it and got a big thumbs up from a WRX STi Driver (highly modded was probably SUPER FAST, but he didn't want to run me [good thing for me...he probably has 2X the HP of EURO85] he just wanted to look at the car) so that was nice.
Then noticed the light in the headliner at the windshield was not coming on and found out why...the housing broke... VERY COMMON, but I don't have a spare lying around right now...so no interior lights for the moment (or radio either...didn't realize they are on the same fuse). That is one of the worst parts on a 928 actually...those light housings are an embarrassment!
#614
I did not get a chance to do anything on mine today.
did not get home from Emg till 6 this morning.
About the video, thanks for sharing. I would not call that a GTO or a judge. The real GTO had way more power and was a real car.
The junk GM sells now is a disgrace.
did not get home from Emg till 6 this morning.
About the video, thanks for sharing. I would not call that a GTO or a judge. The real GTO had way more power and was a real car.
The junk GM sells now is a disgrace.
#615
Captain Obvious
Super User
Super User
Joined: Aug 2003
Posts: 22,846
Likes: 340
From: Cambridge, Ontario, Canada
The new ones are 50hp stronger, almost 2 sec faster in the 1/4 mile and would run circles around the old one. There is nothing junk about these re badged Holdens. Selective amnesia is a wonderful thing.