When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a brand new Macan loaner while my Cayenne is being repaired, and I hooked-up my Launch x431 Pro Mini and it appears that there is a ton of functionality available.
So, if anyone is looking for an alternative to the PIWIS, this might be a good option.
I'll have the car through the weekend if anyone would like me to search for anything specific.
Okay, I’ll bite , lol
Are you able to change the Max Boost displayed in the MFD,
or, decrease beep sound for the closing hatch ?
or access the height of an Air suspension equipped MACAN.
have fun !
Okay, I’ll bite , lol
Are you able to change the Max Boost displayed in the MFD,
or, decrease beep sound for the closing hatch ?
or access the height of an Air suspension equipped MACAN.
have fun !
OK, I was able to active the boost gauge on this vehicle - as it wasn't activated originally - and then I was able to adjust the max of the boost display from the default 1 bar to 3 bar. I did a test drive and it makes the bar graph longer and the readout even appeared to indicate larger values that it did when it was set to 1 bar, so this appears to work as expected.
This vehicle doesn't have the air suspension, so I can't access that module to see what functions are available.
I turned-off the beeps on my Cayenne hatch, but I haven't tried yet with the Macan, but I will.
Okay, I’ll bite , lol
Are you able to change the Max Boost displayed in the MFD,
or, decrease beep sound for the closing hatch ?
or access the height of an Air suspension equipped MACAN.
have fun !
OK, successfully turned-off the beeping for the closing/opening of the hatch.
I've seen it on Amazon as well. There are a bunch of different versions - not to mention a US seller and a China seller - and it can be a bit confusing, but if you scan through the thread I linked in the first post, you can see the conversations we've already had over the version types, functionality, etc.
Last edited by dollarlongnecks; 12-21-2019 at 09:40 PM.
Reason: add product name