When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
got one exciting shipment from Belgium, been dreaming about getting my hands on a set of these since I got the car. cleaned, Colorlouck leather protector & leather shield, and installed. Got a quick drive in before a storm rolled in last night, so snug. Interior is really coming together. couple things to do to the door cards and i'll get it out for some proper photos
Any errors because of passenger seat missing the weight sensor?
Saved 68 pounds and got electronics working properly while switching to RWD
9971tt, PLEASE share how. There’s been a lot of us wishing to do this, but no one succeeded from what I can find. I tried to PM you but it didn’t allow it.
9971tt, PLEASE share how. There’s been a lot of us wishing to do this, but no one succeeded from what I can find. I tried to PM you but it didn’t allow it.
My kid is editing the videos and time lapse footage now. We should have a full youtube walkthrough soon.
Basically just like a 996 delete but we tore apart the clutch pack in the diff and hooked it back up. There are 2 different 2 wire plugs to the front diff, we mounted the temp sensor and the ring that goes around the clutch pack back into the car with both plugged in to keep electronics happy. I used the spindle ends from the disassembled cv axles and removed the rest of the axles, drive shaft, clutch and front diff. Just waiting on a part to fix one of the coolant leaks coming from rt side front cooler.
My kid is editing the videos and time lapse footage now. We should have a full youtube walkthrough soon.
Basically just like a 996 delete but we tore apart the clutch pack in the diff and hooked it back up. There are 2 different 2 wire plugs to the front diff, we mounted the temp sensor and the ring that goes around the clutch pack back into the car with both plugged in to keep electronics happy. I used the spindle ends from the disassembled cv axles and removed the rest of the axles, drive shaft, clutch and front diff. Just waiting on a part to fix one of the coolant leaks coming from rt side front cooler.
Wow! I've thought about doing this. Please update this thread with the YouTube link when it's done.
Any errors because of passenger seat missing the weight sensor?
had a buddy code out the passenger AWS out and no dash codes are showing. There is one DTC for a short circuit to the passenger belt buckle bc the euro belt buckle that comes fixed to the seat doesn't have a sensor wire that runs to the wiring harness. I'm not concerned as it does not show a dash light. I may retro fit my OE passenger belt buckle and mount it under the seat and into the wiring harness with a male insert to get rid of that DTC. There are a few threads on how folks actually retrofit everything including a passenger weight sensor/belt buckle. Most seem to just code out like I did